Has anyone here pulled out their center console? I could get most of it off but can't figure out how to remove the window switch panel. I want to install a short shifter. Thanks, Dan

Look at my Pro-fit mount how to. then there is a link to profit. There are instructions on there to remove them, but its for an equinox.

Has anyone here pulled out their center console? I could get most of it off but can't figure out how to remove the window switch panel. I want to install a short shifter. Thanks, Dan

The window button beze is removed by first pulling out the little black insert in the tray area. Once thats out you should see two small slots. Push a flat head screwdriver in each slot and gently lift the bezel out.

The window button beze is removed by first pulling out the little black insert in the tray area. Once thats out you should see two small slots. Push a flat head screwdriver in each slot and gently lift the bezel out.

Hmmmm, I already tried that and pulled pretty hard but was afraid something would break, I guess I'll go back at it again.

Hmmmm, I already tried that and pulled pretty hard but was afraid something would break, I guess I'll go back at it again.

I followed this procedure with no problems, dan-d. That is how I got it out to paint it.
Check it out (http://www.hhrclub.org/gforum.cgi?do=post_attachment;postatt_id=529;)

I followed this procedure with no problems, dan-d. That is how I got it out to paint it.
Check it out (http://www.hhrclub.org/gforum.cgi?do=post_attachment;postatt_id=529;)

yeah i finally got it out. mine was real tight and I thought I was gonna break something, but it came out just fine with a bit of extra force. Thanks :)