Does anyone know if the air intake catback and headers work on the hhr?

Intake is a definate NO! Engine bays are different. Fujita, AEM, and even the "JDM" brand on EBay all make the intake drop to the pass side and we have NO room like they do. Also the piping on those are 3" and the HHR needs a 2.5" pipe or it will eventually throw a code.

Header (singular, not headerS, we only have one exhaust side of the engine), YES any header for the cobalts will fit. ALL engines offered in the Coby/Ion/HHR are using the same bolt/head fittings. Pacesetted, XTC, CA, ZZP... they all fit. with NO modding the header needed. HOWEVER some HHR's and Cobalts have a secondary air injection that connects the head to the intake. These WILL NOT WORK no matter what!!!

All exhausts are bolt on affairs! Everything swaps except the hangers. Some of the hangers are different. All Cobalt/Ion/HHR share the same chassis (delta platform) and therefore have IDENTICAL exhaust routing. Even the coupes!

I myself have a GMPP manifold, gutted SS/SC downpipe, and custom 2.25" Exhaust... some people here like the IMCO mufflers that Mike sells on his website www.socalhhrs.com Personally I like my exhaust a little louder. I use a magnaflow universal 2.25 straight through bolt on oval with a welded tip. Biggest difference I have found was with the SS/SC downpipe. W*O*W*!*! Feels like a whole other car!

One of the HHR owner's on here has a GMP exhaust from a Coby on his HHR if I remember correctly. Hope this info is useful!

Air Intake & Cat-Back = no (cat-backs require custom fabbing).
Headers = yes.

Hope it helps,

Thanks for thi Info I would like to keep it under warranty I had a cobalt and traded for the HHR taking both my kids around now and needed the utility. I miss the ss/sc's power i had it with stage two and I would love to get my hhr at least 2 200 horses. thanks,

wow you went from the ss/sc to the hhr 2.2L good luck only advice is turbo

I used them all
air intake, headers, high flow cat, cat back... ECM upgrade..

so we could use the vibrant header with dp and highflow cat on ours?

Yes opOnGamE. We can use their header and dp. Although the CA header is better because it cuts the outside of the header to 2.5" instead of 3" to help with midrange.

how did you get the ecm upgrade for this car ? That i am very interested in cause in made a big difference in the cobalt on how the engine behaved. I dont need to 250 horses but any pep i can give my hhr would help.

wow you went from the ss/sc to the hhr 2.2L good luck only advice is turbo
Yeah it hurt a bit but you know I had in one year more issue with my cobalt than any car i have ever had. Yeah it ran like hell, but I had to have rotors swapped cruise control , clutch and various other goodies over 1 year and it had only 9,000 miles

As of yet there is no tuning available for the 2.2 engine. We're still waiting.

speedmafia has the kit for the saturn ion 2.2L ecotec and has cracked the ecu

DO you know if it can be pu in the HHR.. I ooked at the site they only hada a procharger system for the ion not sure how it would fit in the engie bay.