Ipcw tail light color
10-03-2016, 06:46 PM
#1
Senior Member
Thread Starter
Join Date: 09-16-2013
Location: Tampa, Florida
Posts: 1,408
Ipcw tail light color
So I am going to order the ipcw tail lights finally but my only problem is I don't know which color! Torn between Bermuda black and the ruby red. The Bermuda black is...well....all black whereas the ruby red has a black bezel.which do you guys think will compliment Greggs rear opens the best? Check my gallery for photos. I'm on mobile right now. Thatnks for the pending criticism!!!
10-04-2016, 09:55 AM
#3
Senior Member
Thread Starter
Join Date: 09-16-2013
Location: Tampa, Florida
Posts: 1,408
Well as I thought about it with the black stripes and the black SS spoiler, as well as black housing Depo's, I ordered Bermuda black due to arrive Thursday with same day install! 
. Cant wait to post up some pictures!
. Cant wait to post up some pictures!
10-05-2016, 07:32 AM
#5
Senior Member
Thread Starter
Join Date: 09-16-2013
Location: Tampa, Florida
Posts: 1,408
I know. I could not find them any cheaper than on Amazon from the company itself unfortunately. With something like this, I would much rather buy new. On a side note my SS spoiler is a cool black as of last night and I will install soon :)
10-06-2016, 05:31 AM
#7
Senior Member
Thread Starter
Join Date: 09-16-2013
Location: Tampa, Florida
Posts: 1,408
No thread but I did finish painting it :) Not the best paint job (my first ever) but still looks good nonetheless. Im using a very unconventional and taboo method of mounting by using 3M VHB Adhesive Tape. If Hurricane Matthew doesnt dump too much rain on us here I may just do that this evening.
10-09-2016, 11:21 AM
#8
Member
Join Date: 08-06-2016
Location: shippensburg PA
Posts: 53
checked out you photos. looks great. in the second pic are they the new tail lights? in other pics it looks like you had the spoiler on first but didnt see it in that one. how did your method of attaching it work out.
10-09-2016, 11:27 AM
#9
Senior Member
Thread Starter
Join Date: 09-16-2013
Location: Tampa, Florida
Posts: 1,408
The 3M VHB tape is holding VERY well (at least where contact had been made). Unfortunately my amateur work shows, and there are some gaps where the tape simply didnt stick. I am going to fill them in with some permatex window and glass sealer to "seal the deal." Reason for using the window and gladd sealer is that it tends to find its way into gabs better than ordinary silicone. With that stuff the spoiler will not be easily removed. Still, without the permatex, I can grab hold of the spoiler and yank up and down and the only thing that moves is the car XD
Thread
Thread Starter
Forum
Replies
Last Post