When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just follow the directions that I included in the box for shortening the bump stops. Other than that, just swap out the springs. You DO NOT need and special bolts for camber. That will be fine. Just have the toe checked and, at some point, you need to check your headlight alignment. That's in the Owner's Manual, BTW and easy. Good luck and post some pics when done!
hey joe so ill probly be drop my hhr off at one of the aliment shop so as far as the install should it go just pop in the springs is their no foam spaces need and what do i tell them about cutting the bump stops thanks from james