Diff between a 2.2L vs 2.4L Ecotec
I know this may sound like a dumb question and on either part of the forum, I could not find a difinitive answer.
Aside from the obvious difference in cubic inches. What made the 2.4 so different from the 2.2 as I am looking to put a K&N air intake on a 2007 Automatic 2.2L LT HHR and they only list it for the 2.4L Does not look like any difference in fitment but I gotta do more research and this has led me here so any thoughts are appreciated. http://www.ecotecforum.com/forums/sh...ec-information http://www.ecotecforum.com/forums/sh...Specifications looks like the 2.4L was a Veriable Valve Timing Motor but thats not going to make a big diff either. (In terms of fitment physically on the outside.) Any thoughts on this?? |
I think externally, as far as fitting the K&N goes, they would be the same...... but I don't have facts supporting this. (Yeah! I know..... no help.) They both use the same factory box, no?
|
Originally Posted by Greybeard999
(Post 469043)
I think externally, as far as fitting the K&N goes, they would be the same...... but I don't have facts supporting this. (Yeah! I know..... no help.) They both use the same factory box, no?
|
I think a tune after any mod is inevitable to take full advantage of the mod. Is your LT an auto or manual?
|
Originally Posted by Greybeard999
(Post 469069)
I think a tune after any mod is inevitable to take full advantage of the mod. Is your LT an auto or manual?
It wont get a turbo for numerous reasons, and if I am going to spend that coin, I am building a 440 cid LS2/3 based LSX motor with ETP heads and 240/250 roller cam. :D Physically I do not see it an issue but I will send a message today and post for those who are also interested. :thumb: |
All times are GMT -5. The time now is 08:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands