How To:Change Rear Wiper
 

you will need a
Trico Exact Fit blade 11A i got mine for $15 shipped
Attachment 33949

Remove cover at bottom of Wiper Arm
Attachment 33950

Pull wiper arm upright
Attachment 33951

Rotate blade untill it forms a T
Attachment 33952

Then pull off Blade
Attachment 33953

put new blade on and reverse

Attachment 33954

Nice tutorial! Thanks for posting it!!!

Too bad it wasn't here when I changed mine!!! :lol:

ive always wonderd this. cuz not like i use the rear wiper but still good to know if i ever do decide to change the rotting one off lol

I could have used this tutorial as it was a PITA to replace it not knowing about step 2..

Once you pull the nut cover off, snap off the little tab and you can pull your wiper us like that each time you wash without taking it off.. Did mine the weekend I brought it home. :lol:

Good info for future reference. Thanks !

At PEP BOYS Pro-Line brand 11-2 for about $12.00. Their book says they don't carry a replacement part, but this part is identical to the factory part, so don't bother asking at the parts counter.

So... is it a 10 inch or a 11 inch replacement. My fiance's needs replacing and she said the "wiper blade self service computer" at the parts store said she needed a 10 inch?

From what I have found most web sites state a 11".

Some stores or companies will sub a different size if they do not offer the size used. The line your store has may not offer a 11" and just subs in a 10 inch.

thanks!!!