How to replace headlight bulbs on 2007 HHR?
#2
You need to remove the 2 push pins and 1 screw from the outside edge of the wheel well. Then 1 screw on the inside wall. To get a little more room, there are 2 more push pins and 1 screw under the lip also. You can either turn the tire all the way to inside, or take the tire off. This give you all the room you need to get to the back side of the headlight and keep the new bulb clean.
Pain, yes, but it's actually not too bad.
Pain, yes, but it's actually not too bad.
#3
great video. visual process.
I watched with pleasure. Recommend.
http://www.youtube.com/watch?v=ldlJdh3M8fs
I watched with pleasure. Recommend.
http://www.youtube.com/watch?v=ldlJdh3M8fs
#7
You need to remove the 2 push pins and 1 screw from the outside edge of the wheel well. Then 1 screw on the inside wall. To get a little more room, there are 2 more push pins and 1 screw under the lip also. You can either turn the tire all the way to inside, or take the tire off. This give you all the room you need to get to the back side of the headlight and keep the new bulb clean.
Pain, yes, but it's actually not too bad.
Pain, yes, but it's actually not too bad.
Not that difficult.
#10
I just replaced both of mine on my 08. This is pretty much how it is done. I had a little trouble getting the new bulb to seat back in. I discovered that when I took the old bulb out the sealing gasket at the base of the bulb stuck to the back of the headlight housing. After I discovered this and pulled it off the new one went right in.
Not that difficult.
Not that difficult.