Lug nut torque spec?
10-06-2008, 10:23 AM
#1
Senior Member
Thread Starter
Join Date: 08-06-2008
Location: Grand Haven, MI
Posts: 1,761
Lug nut torque spec?
I just rotated my tires again over the weekend and torqued to 100ft/lbs. That's just what I always have done. Does anyone know the correct torque specification?
10-07-2008, 01:25 PM
#6
Senior Member
Join Date: 05-17-2008
Location: Indiana
Posts: 350
Yup, and like what's been posted here about it, when i did my first rotation/torque wrench(and not just what i felt was "tight" with a impact) whatever slight pulse i had from the rotors prior to me doing the rotation, went away completely
So proper lug nut torque is very important for a lotta reasons
So proper lug nut torque is very important for a lotta reasons
10-08-2008, 05:55 AM
#8
Senior Member
Join Date: 08-06-2007
Location: Edison, NJ
Posts: 359
Also important is to torque the lug nuts in a star pattern - gradually. 100 ft. lbs. is not an enormous amount of torque. If you are physically strong you can easily over-torque the lug nuts on the first pass.
10-08-2008, 10:27 AM
#9
Senior Member
Join Date: 05-17-2008
Location: Indiana
Posts: 350
Yup to all the extra info here
FYI/FWIW: I picked up a new torque wrench from Sears(clicker type w/ case for around $70) this morning, almost can't wait to rotate and do the "hard to reach when just standard washing the car, so i clean/wax the wheels when i rotate 'em" thing soon. I'm due in prob another 1K .
Also a good time to really clean the fenderwells and check around for things w/ the wheels off .
FYI/FWIW: I picked up a new torque wrench from Sears(clicker type w/ case for around $70) this morning, almost can't wait to rotate and do the "hard to reach when just standard washing the car, so i clean/wax the wheels when i rotate 'em" thing soon. I'm due in prob another 1K .
Also a good time to really clean the fenderwells and check around for things w/ the wheels off
.
10-08-2008, 10:30 AM
#10
Senior Member
Join Date: 05-17-2008
Location: Indiana
Posts: 350
Not to hijack the thread here, but does anyone here have a thumbs up on some good locking lugnuts?
I feel that i'm tempting the badguys with not having at least a special key type lug on each wheel, and figure the best time to put them on is during a rotation.
I feel that i'm tempting the badguys with not having at least a special key type lug on each wheel, and figure the best time to put them on is during a rotation.
