papa_jo

ok a few weeks ago I was getting a P0011 code from engine light.
changed oil and filter light went away,
engine light came on this past Friday morning. today I changed
intake and exhaust cmp solenoids and air filter

with first start up light was off, than it came back on with service esc on speedometer taking a break and reflecting a few moments

guess I need to go and get code read again for engine light and go from there.

donbrew

Bet you forgot to plug the MAF back in.

papa_jo

nope, well yes it was as a matter of fact.
it took away all readings of esc... service, no . i'll ride to store tomorrow and get it scanned again

donbrew

Are you using Google Translate?

That made absolutely no sense.

papa_jo

no I am not LOL.
Yes , I had left it unplugged.
I had problems installing the air filter housing.
but after plugging it back in, I still have the engine light on

Oldblue

Try a few trips first then have the codes read then cleared!

donbrew

You will probably have about 4-5 weird codes that will clear themselves after 3-4 cold starts.

I just did that today.

whopper

or...... try disconnecting the negative side of the battery for a few minutes to clear the existing codes and start all over.

papa_jo

up date have dropped off at shop this afternoon- don't have time <with work> or knowledge will let you know what happens

UPDATE all is well.... I broke a wire on the exhaust solenoid.......when I took the wires off.... all is well now