Torque Specs? (Wheel bearing bolt, spindle nut)
#6
Install the drivetrain and front suspension frame bolt (4) in the frame (6) and tighten the frame bolt (4) to 100 N·m (74 lb ft). Using an angle meter rotate the frame bolt (4) 180 degrees.
Install the front lower control arm brackets (5) and the lower control arm bolts (2) and tighten to 55 N·m (41 lb ft).
Install the front lower control arm (3) in the steering knuckle (1).
Install the lower control arm bolt (3) in the steering knuckle (2).
Install the lower control arm nut (1) and tighten the lower control arm nut (1) to 50 N·m (37 lb ft). Reverse the nut 3/4 of a turn. Using an angle meter rotate the lower control arm ball stud nut (1) 30 degrees.
Thread
Thread Starter
Forum
Replies
Last Post