General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

Two cars one key?

Thread Tools
 
Search this Thread
 
Old 09-19-2013, 08:23 PM
  #1  
Senior Member
Thread Starter
 
Lucky's Avatar
 
Join Date: 12-24-2007
Location: Seville. OH
Posts: 2,873
Two cars one key?

Years ago with ford's double sided key you could cut one side for one car and cut the other side for a different ford car. Then you could use one key for two cars depending on which way you flipped the key. Has anyone that has two hhr's tried this? I know that you would have to program the key for both cars but it seems like it may work.
Lucky is offline  
Old 09-19-2013, 10:58 PM
  #2  
Platinum Member
 
firemangeorge's Avatar
 
Join Date: 12-06-2009
Location: Alabama
Posts: 11,097
I doubt the key could be programmed for 2 cars.
firemangeorge is offline  
Old 09-20-2013, 08:21 AM
  #3  
Senior Member
 
Ron S's Avatar
 
Join Date: 12-02-2010
Location: Roanoke Va
Posts: 840
There very well may be two sets of tumblers. I ran into that in 1974 when I bought a new Audi Fox. The dealor only had one key for it . They gave me a new blank only it was steel not brass so it had to be hand cut. The locksmith that did it said only one side had to be cut. He could not get it to work and I asked could it have two sets of tumblers, he said I know how to find out and quickly cut the bask side and it worked perfectly. The Porsche 928 has 4 sets of tumblers.
Ron S is offline  
Old 09-20-2013, 12:38 PM
  #4  
Senior Member
Thread Starter
 
Lucky's Avatar
 
Join Date: 12-24-2007
Location: Seville. OH
Posts: 2,873
It may have more then one set of tumbler. I will have to do some checking on that.
Lucky is offline  
Old 09-20-2013, 01:14 PM
  #5  
Senior Member
 
jaytheredneck1's Avatar
 
Join Date: 08-25-2012
Location: Hamilton, On
Posts: 120
BTW the key isn't programmed to recognize the car, it's the car that learns to recognize the key. If you have multiple GM cars with the same key blank, you CAN have the locks and ignitions keyed for whatever key you want, and then go through the programming scheme on each car so that all of the cars recognize that key.

You could have an entire fleet of HHR's on one key if you like.
jaytheredneck1 is offline  
Old 09-20-2013, 01:50 PM
  #6  
Senior Member
Thread Starter
 
Lucky's Avatar
 
Join Date: 12-24-2007
Location: Seville. OH
Posts: 2,873
I was thinking about that but then to do it right I would also have to do the drivers door key cyl. As well. I like the idea of one key for both cars but don't want to rekey mutable lock cyl. And I agree the car is programmed to accept the key so that part should work. I ordered a cheep transponder key on ebay when it gets here I will try it and see what happens. I will update when i find out.
Lucky is offline  
Old 10-04-2013, 05:30 PM
  #7  
Senior Member
Thread Starter
 
Lucky's Avatar
 
Join Date: 12-24-2007
Location: Seville. OH
Posts: 2,873
Well I ordered a key from the internet and found a place that was able to cut the key with two different sides to it. Much to my disappointment it won't work. The key will work in the ignition of the 08 but not the door lock and will not work in the 07 car at all.
Lucky is offline  
Old 10-04-2013, 10:01 PM
  #8  
Deceased
 
843de's Avatar
 
Join Date: 06-30-2010
Location: Kannapolis NC
Posts: 25,739
Well, nothing ventured, nothing gained as the saying goes.

Sorry your idea didn't pan out, had it worked, it would have been super handy.
843de is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lordairgtar
General HHR
41
07-26-2011 10:27 PM
Jeff®
The Lounge
5
04-09-2009 07:57 AM
WaynesWorld
The Lounge
5
08-25-2008 04:35 PM
SIHHR
General HHR
39
08-23-2007 11:16 AM



Quick Reply: Two cars one key?



All times are GMT -5. The time now is 08:57 PM.