Question about seats in 08 panel
#1
Question about seats in 08 panel
First post here. Hope this is the right section. Just got 08 panel about two weeks ago. I installed rear seats this past weekend. Everything went well until i went to bolt in the top of the seat belts. For some reason the top holes have no threads to bolt to. Anyone have any suggestions on how to remedy this problem. I was thinking maybe some type of T nut. Parts guy at dealership suggested tapping, but it doesnt look like that would be strong enough.
#2
Senior Member
Join Date: 01-13-2006
Location: Superior, WI - Over the Hill Warranty Club member
Posts: 2,999
You have to tap them. Others have added the back seats also.
Here is a how to discussion.
https://www.chevyhhr.net/forums/show...ight=back+seat
Post 18 explains the tap you need along with the bolts.
And welcome to the Forum.
Here is a how to discussion.
https://www.chevyhhr.net/forums/show...ight=back+seat
Post 18 explains the tap you need along with the bolts.
And welcome to the Forum.
Thread
Thread Starter
Forum
Replies
Last Post
Mrs. DLVRNIT
Appearance/Modifications Discussions
27
11-30-2011 04:32 PM