new BOV spring installed...
purchased the BOV spring from a known supplier, (don't know if they are a supporting vendor here) and it works great. You can feel the differnce in the spring tension. You also feel the difference in the throttle, very happy with this inexpensive mod, (all of $9.95) and a few minute change. Of course don't I drop one of the bolts into never never land. What should have taken 10 minutes took much longer, which included a trip to Home Depot for the new bolt.
Anyway, boost comes on much quicker, and throttle response is better than before, it is right there. Overall feels good, great addition to any tune that you may have, or even if your not tuned yet, you will feel the difference.
An extra added attraction was the discovery of the lower air tube clamp going in to the turbo which was also loose.
Overall a good mod to do
Anyway, boost comes on much quicker, and throttle response is better than before, it is right there. Overall feels good, great addition to any tune that you may have, or even if your not tuned yet, you will feel the difference.
An extra added attraction was the discovery of the lower air tube clamp going in to the turbo which was also loose.
Overall a good mod to do
Well I'm glad you liked the little mod I told you about Tom!!!!!!!!!!!!
Replacement Spring for Factory Compressor Bypass Valve (or BOV)
http://cobalt.dejonpowerhouse.com/
under bov-misc-tools section
Replacement Spring for Factory Compressor Bypass Valve (or BOV)
http://cobalt.dejonpowerhouse.com/
under bov-misc-tools section
Eric, can you describe exactly what this does?
I know we have a waste gate, but you refer to a BOV, which I thought was an additional part that may be added.... Does the new spring increase the pressure at which the waste gate opens? Thus more boost??
I know we have a waste gate, but you refer to a BOV, which I thought was an additional part that may be added.... Does the new spring increase the pressure at which the waste gate opens? Thus more boost??


