07 2.2
It seems that the 07 2.2 has the same valve cover design as the 2.4, I'm just waiting to see if the CGS will fit the 07 with out moding it. Sorry about the crapy cell phone pics but the camera was dead.
https://www.chevyhhr.net/gallery/files/2/6/3/5/2.23.jpg https://www.chevyhhr.net/gallery/files/2/6/3/5/2.21.jpg https://www.chevyhhr.net/gallery/files/2/6/3/5/2.22.jpg |
1 Attachment(s)
It will fit with no mods necessary. The CGS mounting strut fits under the bolt shown in your top photo (between the two plug coils). Like this:
The strut is barely visible in this pic: Attachment 42432 Hope it helps, |
That should help the aftermarket manufacturers a lot.:thumb:
|
Yup it Fits
I have an 07 with a 2.2L auto. CGS tube fit just fine in my engine compartment. Only used the 2 tools that are listed in the directions. Took about 45 mins to instal
|
I've taken mine on and off a few time and now it maybe takes me 3 mins to change. I really got good when i was messing with that freakin "outlaw" filter to get it to stop rattleing.
|
But why replace a cold air intake with a warm air intake?
|
Originally Posted by Lone Ranger
(Post 198467)
But why replace a cold air intake with a warm air intake?
|
All times are GMT -5. The time now is 09:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands