Tires & Wheels Tire and Wheel discussions. What Fits, Show Tires, Custom Wheels

sky rims

Thread Tools
 
Search this Thread
 
Old Aug 5, 2010 | 08:16 AM
  #1  
06SILVERLT's Avatar
Thread Starter
Member
 
Joined: 06-27-2009
Posts: 86
From: Elkton MD
sky rims

i was wondering will the saturn sky wheels fit on my 06 hhr without doing any mods like spacers
Old Aug 5, 2010 | 08:33 AM
  #2  
solman98's Avatar
Senior Member
 
Joined: 07-17-2006
Posts: 6,053
From: Dallas, GA
Yes they fit, and yes you will need spacers.

There are a few here that have done it.
Old Aug 5, 2010 | 08:36 AM
  #3  
06SILVERLT's Avatar
Thread Starter
Member
 
Joined: 06-27-2009
Posts: 86
From: Elkton MD
where can i get spacers what size would a need also do i need to buy longer wheel studs
Old Aug 5, 2010 | 09:59 AM
  #4  
solman98's Avatar
Senior Member
 
Joined: 07-17-2006
Posts: 6,053
From: Dallas, GA
Originally Posted by 06SILVERLT
where can i get spacers what size would a need also do i need to buy longer wheel studs

I'll wait until someone that has them already installed chimes in to give you better info on that. But I think they were 1/4" or 3/8". I don't think they had to get longer studs.
Old Aug 5, 2010 | 10:12 AM
  #5  
06SILVERLT's Avatar
Thread Starter
Member
 
Joined: 06-27-2009
Posts: 86
From: Elkton MD
now is that just for the front
Old Aug 5, 2010 | 10:21 AM
  #6  
solman98's Avatar
Senior Member
 
Joined: 07-17-2006
Posts: 6,053
From: Dallas, GA
Originally Posted by 06SILVERLT
now is that just for the front
I think it's for all four. But better to get that info from someone that has them installed.
Old Aug 5, 2010 | 11:12 AM
  #7  
djr1973's Avatar
Senior Member
 
Joined: 05-11-2009
Posts: 2,116
From: Weston, Ohio
I have Pontiac Solstice wheels that are pretty much the same as far as Saturn Sky wheels. I used 1/4" shims on all 4 wheels. I didnt change my wheel studs but I did buy a set of extended tip lug nuts.
Old Aug 5, 2010 | 02:00 PM
  #8  
06SILVERLT's Avatar
Thread Starter
Member
 
Joined: 06-27-2009
Posts: 86
From: Elkton MD
where can i get them at the shims
Old Aug 7, 2010 | 09:14 AM
  #9  
06SILVERLT's Avatar
Thread Starter
Member
 
Joined: 06-27-2009
Posts: 86
From: Elkton MD
y would i need to shim the back wheels it looks ok
Old Aug 7, 2010 | 09:54 AM
  #10  
djr1973's Avatar
Senior Member
 
Joined: 05-11-2009
Posts: 2,116
From: Weston, Ohio
I shimmed the back wheels just to try to keep the tire tracking in line like the factory set up. I bought my shims off of ebay.



All times are GMT -5. The time now is 05:25 AM.