exhaust
exhaust installed sorry about the pic over cast dayhttps://www.chevyhhr.net/gallery/fil...1417.47.52.jpg:twothumbs:
|
:twothumbs: Nice!
|
Looks very clean!
|
Very nice STEREO :cowboy:
|
thanks alot took awhile to do il get more pics later it raining now:thumb:
|
nice, looks great, and bet it sounds even better :twothumbs: what kind of setup are you running, and how was it routed?
|
hey lunchbox thanks they made a a Y pipe over the axle if i can il get some pics underneath the car thanks again:twothumbs:
|
that'd be appreciated, i'm getting my exhaust put on this saturday, i've only seen a few dual setups, so any pics would be great. the duals do make the rear end look sick :twothumbs:
|
exhaust
hey , lunchbox this pic is the Y pipe over the rear axle they did a real clean job im so glad to to get that cat back system off of there, i kept the resonator on there and i went with two magna flow street mufflers of of ebay i got them for 90 dollars a muffler but any way im real happy with the out come . i wish you luck make sure you take some pics when you get yours installed . i want to take more pics but the weather wasnt working with me.:twothumbs:https://www.chevyhhr.net/gallery/fil...1515.32.56.jpg
|
thanks man, looks like a high quality install, very clean :twothumbs:
|
Very nice set up! Did you cut the outlet for the 2nd tail pipe? Or did you get an aftermarket bumper?
|
Now we need some soundclips. maybe one at idle and then one as a drive by
|
Originally Posted by Rod Run
(Post 564890)
Now we need some soundclips. maybe one at idle and then one as a drive by
Later Allex |
That looks like a fifty fifty split at the y are you getting equal flow to both sides, We had to build a diverter in my Y to get them to flow evenly at the tips the passenger side has a longer curvier path so we sent 60 % that way. The little white clouds it makes at idle are identical. Probably don't make any diff to the car I'm just anal forgive me.:propeller:
|
thanks everyone , yes i did cut the bumper, i got the exhaust done (mbs) performance exhaust here in pasadena. i wish i could do a sound clip for ya but i have no camera sorry, im thinking about doin some high flow cats not sure yet got to do some research and thinking about doin something with that huge resonator:twothumbs: https://www.chevyhhr.net/gallery/fil...1417.47.52.jpg
|
Sweet Job Reed :twothumbs:!
Originally Posted by capp002
(Post 564943)
thinking about doin something with that huge resonator |
thanks kev i finally got it done it was a very long day:thumb::thumb:
|
Capp002 If you love the tone and volume you have now I would suggest leaving the resonator alone, I switched mine to quiet it down and it worked, it didn't cause any restriction,just made a tone. :cowboy:
|
ss fan was it louder with it off? what did it sound like?:twothumbs:
|
My Mufflers were pretty much straight through. I think the only thing holding in the flames was the resonator, It sounded loud. I switched it to a glass pack, sounds just like Rainman's now cept stereo. He is running 3" catback magnaflow.
|
very nice
|
thanks ss fan and ballplr:twothumbs:
|
So, capp.... You going to enter your ride in the June "featured HHR" competition? You got a winner here if you get some good photos. :twothumbs:
June 2011 Featured Submissions |
Yeah the "Featured" deal is a barren wasteland so far, I might be entering if the stripes get done on time, but you should enter.
|
Originally Posted by capp002
(Post 564943)
thanks everyone , yes i did cut the bumper, i got the exhaust done (mbs) performance exhaust here in pasadena. i wish i could do a sound clip for ya but i have no camera sorry, im thinking about doin some high flow cats not sure yet got to do some research and thinking about doin something with that huge resonator:twothumbs: https://www.chevyhhr.net/gallery/fil...1417.47.52.jpg
|
2 Attachment(s)
I you don't mind me answering I used a multi Master, and dremel.
|
Thanks SS! So did you make yourself a template to cut it out? Did you sand down the edges and paint the area you cut? Or just cut it out and put the exhaust up? I do like your set up as well.
I just am not exactly comfortable cutting up my bumper! lol. |
There are a few considerations when laying it out I used a grease/wax pencil from my granite and marble tool box to get it where I wanted then just follow the line. Because of the shape of the original hole I say it is easier to do round tips.:propeller:
|
Originally Posted by SS fan
(Post 565143)
There are a few considerations when laying it out I used a grease/wax pencil from my granite and marble tool box to get it where I wanted then just follow the line. Because of the shape of the original hole I say it is easier to do round tips.:propeller:
|
thanks for answering ss fan:thumb: greybeard im goin to try to enter im working on the paint now getting out the little fine scratches out its looking great so far :thumb:
|
Originally Posted by capp002
(Post 565180)
thanks for answering ss fan:thumb: greybeard im goin to try to enter im working on the paint now getting out the little fine scratches out its looking great so far :thumb:
Just curious to see what your using. |
hey, ive been getting out the fine scratches with the porta cable polisher 7424 i got it from auto geek they have videos on how you should do it ive been using the wolfgang product awesome stuff check out auto geek.com:thumb:
|
hey everyone heres a betr pichttps://www.chevyhhr.net/gallery/fil...2808.13.36.jpg:twothumbs:
|
Jami
Hi this is my first GM vehicle in about 19 years. The vehicle I just got rid of was an american made Ford Tempo. Now I own a 2011 HHR WHITE. My Father retired from the Tonawanda engine plant on river road. Now I feel part of the family again.
|
Welcome to the forum! :skull:
|
Welcome Jami
:howdy: |
Originally Posted by capp002
(Post 567578)
hey everyone heres a betr pic
:twothumbs: |
All times are GMT -5. The time now is 07:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands