Chevy HHR Network

Chevy HHR Network (https://www.chevyhhr.net/forums/)
-   Mods - Exterior (https://www.chevyhhr.net/forums/mods-exterior-55/)
-   -   the making of a 6 DOOR HHR ! (https://www.chevyhhr.net/forums/mods-exterior-55/making-6-door-hhr-58506/)

hellshotrod 03-04-2017 01:17 PM

the making of a 6 DOOR HHR !
 
2 Attachment(s)
i have a few dead bodies laying around so time for some therapy what i like doing fab ,,, some like some don't ,,,,, but its fun , will post as i have time to work on it , looks do able just fun on the roof line its gone take some re shaping ,,


Attachment 21010

Attachment 21011

RJ_RS_SS_350 03-04-2017 01:23 PM

I like. :thumb: :thumb:

donbrew 03-04-2017 01:47 PM

I did a little editing of your attachments.

Works better if After you upload the attachments you click on the paper clip icon, then insert the images where you want them or insert all.

I think this ensures against disappearing pictures.

Oldblue 03-04-2017 05:24 PM

1 Attachment(s)
Keep up the good work, I've seen limousine HHR but no 6 doors!

Greybeard999 03-04-2017 06:09 PM

Ummmm..... Why?

hellshotrod 03-04-2017 06:27 PM

cuz i can ,,, lol , thanks for the help DB,,,,,,, 4 front seats and a bench rear , 6 door trucks work well so why not this , gone keep playing with it till it works or i chop it up and turn it into a truck ? or a long topless HHR

firemangeorge 03-04-2017 07:16 PM

Neat idea. It's going to need some sort of frame structure fabbed in to strengthen up the body. Just the unibody structure probably won't support that much of a wheelbase increase.

Years ago I worked at an automotive repair/body shop. The boss had acquired an old VW Rabbit that he wanted the body guys to convert into a limo. I watched them cut the car in half, then weld a bunch of supports to the underside of the floor. I think the stretch section was about 5 feet.
Sadly I left that job before the stretch Rabbit got finished.

hellshotrod 03-04-2017 08:50 PM

yep gone use inner supports they come with and add more altho they are very strong as long as u cross support and over lap your splices u can't just butt well thats the fun and were the roof will be fun making the roof line look right , gona work throw it or mod it to work and be safe ,or make something else out of it more too come when i have time , like the 4 topless hhr's i built they all still drive and have been on the road and driving and re-moded to what the new owner wanted , also I'm not stretching this that way I'm making orig body parts mate and over lap so it should work and be more then safe ,will c ,,,,,

Cat Man HHR 03-05-2017 10:37 AM

Now if you can only install 2 engines.
Here's an idea.


http://hybridtechcar.com/wp-content/...455858_006.jpg

Oldblue 03-05-2017 11:20 AM

Now let's let the OP , get his creativity in gear and rocking!! My kid loved Oldblue, picking up him and his date after the prom! And my niece used it in her wedding! Mine you she was second guessing saying yes to her hoop dress! I had her sit in the backseat, on the passenger side with the front seat all the way forward! The groom sat behind my seat , I did scrunch up a few clicks to give them so room!
So it's either proms and weddings, or a tour/ party limo!


All times are GMT -5. The time now is 11:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands