front seats
#2
Remove the 2 bolts at the rear, Tilt forward, release hook by pushing forward.
There is a thread with pix somewhere. scroll through the how-to area, it concerns re covering.
Here is one the front seats are around pot 6.
https://www.chevyhhr.net/forums/how-...install-13261/
There is a thread with pix somewhere. scroll through the how-to area, it concerns re covering.
Here is one the front seats are around pot 6.
https://www.chevyhhr.net/forums/how-...install-13261/
#3
#4
thanks so much!!! I saw the 2 bolts for the back, but didn't see anything up front, is why I asked. just wanting to clean things up, start on the passenger side and than d o the drivers side. still off for 3 more weeks, so hoping to do something everyday or 2. I had a reaction to the HYP C medication ,and got the summer off. 12 weeks. I'm though 9 weeks and feeling better now. That stuff knocked my timing off like i'd been drinking. can't operate production machinery like that. last week I've started feeling myself again and waiting on results from blood work to see if we knocked it out !!!!!!! fingers crossed
#5
AND....Don't forget to unplug the wiring before you pull the seats out. Rider presence sensor on the passenger seat. Power seat plug on drivers seat if you have that option.
FYI. If you're pulling the seats completely out of the car, it's easier to take them out the back hatch. Lots more room. Trying to pull them out the front doors is a tight fit. Just asking for scratched up door jambs or damaged seat material.
(Had mine out before. Learned the hard way.)
FYI. If you're pulling the seats completely out of the car, it's easier to take them out the back hatch. Lots more room. Trying to pull them out the front doors is a tight fit. Just asking for scratched up door jambs or damaged seat material.
(Had mine out before. Learned the hard way.)
#6
thanks ya'll. have removed both seats and cleaned up area and cleaned seats as well. firemangeorge, had to remove though front, I have a cage installed on the tool box area of back seat,
when I did a lot of service work<hvac> didn't want stuff flying up front from someone stopping quickly in front of me !!!! and I did remember the plugs
when I did a lot of service work<hvac> didn't want stuff flying up front from someone stopping quickly in front of me !!!! and I did remember the plugs
Thread
Thread Starter
Forum
Replies
Last Post
hhr_zenmobile
Mods - Interior
18
12-16-2014 03:10 PM