We are a 3 HHR family! In addition to the other two we've already had, we just purchased a well kept 2011 with only 62K miles, but it is missing the rear window washer nozzle. I've been searching high and low for this part... and came to this forum. I hope someone here could be so kind to give me some idea of where I might be able to find a replacement? Are there any people that can 3-d print such parts? I am grateful for any suggestions!

 

to the forums!!

Back Glass Washer Nozzle (Rear)
Part Number: 15297224
Supersession(s): 22709466

 

Welcome to the site, my investigation shows the part is discontinued, perhaps a pick a part yard or eBay search may help

https://www.gmpartsgiant.com/parts/g...-15297224.html

 

Thanks all, for your quick replies. I already checked eBay, no luck. I will check some salvage yards.

 

Bought my son a 3D printer, if you can find the files for the print he can print one

 

I wonder how much it would be to adapt a universal jet to your HHR

https://www.ebay.ca/itm/305716043705...mis&media=COPY

 

Is a GM parts department somewhere on the high to low spectrum? Part number 15297224.
Or, O'Relly https://www.oreillyauto.com/detail/c.../acd0/15297224
The HHR part seems to be discontinued, but you might try other models like Blazer, Equinox, Sonoma, Escalade etc.
This one looks like it would work https://www.gmpartscenter.net/oem-pa...ozzle-23170610

 

Except that one needs an oblong hole as opposed to the round hole for an HHR but a little filing would work

 

you might check FB marketplace and search for chevy hhr parts. Many people in my area parting them out….or car-part.com…and search salvage yards in your area