When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Help finding where these bolts go post timing chain replace
SS Specific Service Issues/RepairsService/Repairs specific to the SS. Turbo-Brembo Brakes-2.0 Engine-Limited Slip Differential-Programmable Display-MU3 Transmission
Help finding where these bolts go post timing chain replace
Help finding where these bolts go post timing chain replace
Recently did the timing chain replacement. Which involved
taking off the front engine cover as well as the valve cover. I took good pictures during the process that others saw here on the form under the same sub category. I can’t see any bolts that I missed. I have these two bolts left …. Wondering if anybody is familiar with the length and size in accordance with where it goes. Wondering if there’s a repository online to find out which bolts go where? I figure it’s a longshot but couldn’t see where they could’ve gone otherwise. Thanks.
A couple of the valve cover bolts hide well. One kinda looks like a VVT solenoid bolt. Engine cover bolt. If it’s a 10mm head, that should narrow it down.
A couple of the valve cover bolts hide well. One kinda looks like a VVT solenoid bolt. Engine cover bolt. If it’s a 10mm head, that should narrow it down.
yeah right!
I took the airbox off and looked around and didn’t notice anything left out. I’ll check the front cover again. With how clean the bolts are I’m not too worried that they were something internal if they were they would have that light brown glaze on them.
