Splash protector got ripped off

Reply Subscribe

Thread Tools

Search this Thread

Jun 23, 2020 | 04:03 PM

#11

Oldblue

Administrator

Joined: 10-13-2011

Posts: 40,083

From: Welland,Ont Canada

That’s a right front fender liner, thanks for the photo

And a left front fender liner

Jun 23, 2020 | 04:05 PM

#12

Caden s

Thread Starter

Joined: 06-22-2020

Posts: 3

From: Tucson

Quote:

Originally Posted by fastsuv

If I had to guess, I would say that is the passenger-side front wheel liner.

The wires coming out of the larger box have thick insulation and a well-insulated connector at the end of the red wire. This is usually indicative of high-voltage shielding, which would be consistent with donbrew's guess of an HID headlight driver module.

It's still hard for me to picture how the speed bump could pull the whole liner off, unless it bent the front of the liner down and it got pinched between the speed bump and wheel, causing the wheel to rip it off.

I guess we'll have to wait for more details from the OP.

Steve

sorry sorry guys, fats is right, it’s the passenger side liner, I only called it a splash protector bc of what I’ve been finding about it. My headlights are blue then the brights are yellow. So maybe it is a headlight thing. My car has this on both sides of the front end. Driver side has this too. Also my timing chain assembly is rattling. Thanks for the info guys. But one complication is my headlight is directly connected with a male plug into a female on the wiring harness. Those got ripped up too. I’m looking at selling this car bc it is holding heat and that rattling I mentioned. How hard would it be to do work on this engine myself? Thanks so much!!