just today, got my bar in the mail...absolute top quality and took all of about 20 to install(with ramps or lifting of any kind.....just slid uner on some cardboard and used the shipping box to protect the bar from scratches....cant wait for a "raod test". and, b/t/w...thanks to the guys at TTR for helping with a fedex delivery issue....went clean and green...thanks again.

TTR # 1 rated vendor in my eyes. Thank aaron.. It James btw chevycobaltss3 lol

Thanks James! You are a GREAT tuner!!!

quick question....can i use split lock washers rather than the supplied flat washers..?? flats worked fine....just wondering...

The holes in the bar have a little wiggle room, so I just used the flats w/Loc-Tite..

Every time I check torque on the bolts, they are good..:twothumbs:

Just my .02

BLUE thread lock.......god idea. thanks.

have the new bar on and in place and i do feel a cornering difference. question is.....since it's not connected to the body in any way, how is it helping body roll..?? is it because the bar stiffens up the rear axle..??

It is bolted on the rear twist beam assembly. Each sway bar acts as an "arm", due to the 2 bolt design. The entire rear twist beam assembly is kind of like a big sway bar setup.

ahhh...got ya. either way....i do feel a cornering difference....seems to make driving "easier". i very quickly got used to it..........

More ready to ship!

Any questions? Let us know!

Just want to say great looking site with tons of products on my wish list. I just got a set of ss/sc springs in and as soon as I can your ttr sway bar is next.

Thanks!

More ready to ship!

does it come with install instructions for the mechanically challenged? :p lol

Sure does, step-by-step COLOR install guide, honesltly takes less than 15 minutes to install :)

Any questions let us know!

Hello Aaron.. I was wondering if there was anyway I could get just the install instructions for the TTR Rear Sway Bar...I bought one used and I want to do the install myself...

Thanks..
Vince

PM us let me see what I can come up with.

Aaron you guys got the cobalt sc springs?

We dont, brands we do carry are on our site :) Sorry!

Alrighty do you have something that replaces the FE5 springs?

We carry the Eibach Pro kit and the Pedders Lowering Coils. Check out www.TurboTechRacing.com

This sway bar is well built and was easy to install. It arrived in just a few days and makes a huge difference in how my HHR rides and handles... :thumb:
Thanks Guys.
Mike, San Antonio, TX

Thanks for the awesome review!

More shipping daily!

++ 1

Thanks!!! More shipping and more ready to ship!

Any questions, let us know.

question...just why is it SO easy to install and work SO good..?? i've had mine on for about 6 months..works great and took all of about 1/2 hour to install..............only change what i made was to put lockwashers on the bolts...........dont know why, just did. it was either that or some locktite...

Just worked out that it is a simple way to install it. Not all cars are this easy though :)

could you check shipping cost for the rear sway bar to ship to L3C 7G9 in Canada , Thanks

PM'd

Thanks

No problem! Thank you.

More shipping!

Well I have purchased a used TTR sway bar and it was 7 minutes to install , just backed up on ramps, placed the nut retainer bars, started the bolts with blue Loctite, torqued 'em to spec and done that was last April at another members home in Florida, and what a difference in handling loaded for the trip home and just me in the car for a little rump through the twisty roads we have here in the Niagara region. Awesome job with you're R&D TTR Thanks

Thanks! More ready to ship too!

Has anyone purchased the Excel G-shocks?

are they designed to work with aftermarket coils? wanting to match them up with a set of Goldlines.


Thanks in advance, Aaron!