2009 HHR SS 94k Miles
For Sale2009 Chevrolet HHR
Description:
My HHR SS has 94k on it. Located in Harrisburg South Dakota 57032 Condition is pretty good for its age with NO RUST. I have the carfax and it has never been in a accident, No flood or frame damage. I am the fourth owner. The list is long down below but I am transparent with details.
The engine is not the Original motor from the HHR SS. It is a ZZP Performance engine which is either a LHU or LDK variant.
With the motor it has bigger injectors and has been tuned by ZZP for 91 OCTANE with HP tuners for the mods.
Roughly 290 hp and 320 lbs of torque.
It has the factory manual transmission and the LSD from gm
The car has aftermarket wheels and pretty good life tires. I'd say atleast 50%
Cars windows are slightly tinted.
Exterior Condition
The hood has a rough chip/spot on it. condition.
Bumpers are a little rough with chips/scratches
The rest of the car has minor scratches/chips on it but It is 13 years old and was daily driven.
Interior of the car is really clean. The only bad to interior is small crack on driver seat and the shifter boot is worn and pealing.
New parts within the last year
New factory Brembo pads and rotors
New transmission shifter cable
Both new O2 Sensors
New maf Sensor
New EVAP SOLENOID
New vapor canister vent valve
New K and N Cone filter for ZZP Intake
Fresh Alignment
New fuel cap
ZZP Vacuum switch solenoid
Fresh oil change
NEW LED FOG AND HEADLIGHTS (Fog lights are triple color, White, Yellow, or Yellow and white.)
NEW ZZP UPGRADED INTERCOOLER
GM Stage 1 sensors for more boost with the ZZP TUNE
Forge Motorsports Bypass Valve (NOT BLOW OFF VALVE)
Features
FACTORY BREMBO BRAKES
FACTORY LSD
FACTORY SUNROOF (NO LEAKS)
Muffler delete ( I bought it like that)
Car runs great and makes around 20 lbs of boost. No joy rides.. Must have money to drive. I can also send videos or upload to youtube of car running/driving.
Asking 10k OBO
Needs to be local pickup. I know its a long shot but I have a 7 month old daughter and need to be nearby.
https://www.chevyhhr.net/forums/ss-s...iameter-64831/
The smaller diameter stub fits , but won’t tighten up securely, and it’s possible the steering knuckles can be damaged.
Sadly the steering knuckles for the SS are obsolete. A member here is working on replacement ball joints for the SS, but for now only the GM LCA’s fit correctly.


