3" downpipe w/cutout will fit
#1
3" downpipe w/cutout will fit
Just for those who want to run a cutout any cobalt dp w/cutout will work I went CIA cause hahn was out of stock and CIA was a little cheaper.
Here pics:
I am lowered on pedders and it dose not touch a thing. I went over a speed bump pretty fast the other day and didnt even come close. So those are searching in the future here ya go.
Here pics:
I am lowered on pedders and it dose not touch a thing. I went over a speed bump pretty fast the other day and didnt even come close. So those are searching in the future here ya go.
#4
I not to worry about the fireballs under the car. The cutout is angle away from the fuel lines as you can see in pics. Its funny you say that I would shot some fire under the car while i was racing.
#5
Yeah, you'll not only shoot flames, but have pavement bounce too. wouldn't want to do that too much standing still
#9
I know you say it won't scrape, but one misplaced piece of crap on the road, and you might have to re-wire that puppy. ya know piece of wood on the interstate would suck. a metal pan drilled to the cross-member, to cover that servo might be a good idea.
Oh Videos! Videos! Videos! there is a honda at the track with a cut-out with a dump pipe out the side at just the right angle to piss you off. It aims for your head! and is obnoxious, little bursts of flame, at upshifts. Nothing like open headers on a funny car, but obnoxious none the less.
Oh Videos! Videos! Videos! there is a honda at the track with a cut-out with a dump pipe out the side at just the right angle to piss you off. It aims for your head! and is obnoxious, little bursts of flame, at upshifts. Nothing like open headers on a funny car, but obnoxious none the less.
#10