Hahn Racecraft Super 20g Turbo Upgrade!
Thread Starter
Senior Member
Joined: 04-18-2011
Posts: 384
From: Ocala, FL
In the process of install! The car is still on the lift at Bills place. We ran into a snag from a single bracket that made it a little difficult. 2.5 hours later, we cut out the bracket. Tomorrow morning we should be bolting everything up and maybe doing the tune!
Thread Starter
Senior Member
Joined: 04-18-2011
Posts: 384
From: Ocala, FL
Lol, when I start working pictures are my last thought. I know one of Bills employees who helped out alot today took a few pictures for documentation. Might be able to snag them off of his website.
Thread Starter
Senior Member
Joined: 04-18-2011
Posts: 384
From: Ocala, FL
It's going good. By the end of the week we should have real results. Me and Bill spent the day working and documenting. The turbo was in and out probably nine times, but all has been fully documented by Bill. This is the first HHR this system has been installed on AND the first automatic.
Yes, it is a true bolt on kit. There are only minor fabrications made to make all of the cooling and oil lines fit. If you have a cutoff wheel, you are good! Bill literally has this system designed to bolt right up. The stock exhaust manifold, the stock O2 housing, the stock heat shields, etc. Awesome kit. Most of the time consumption comes from tedious little parts. Hopefully tomorrow we can finish up the cooling lines, charge piping, and intercooler within an hour or so since I will be working on it after I get off work. Otherwise we will be spreading it out another day or two before we get results
Yes, it is a true bolt on kit. There are only minor fabrications made to make all of the cooling and oil lines fit. If you have a cutoff wheel, you are good! Bill literally has this system designed to bolt right up. The stock exhaust manifold, the stock O2 housing, the stock heat shields, etc. Awesome kit. Most of the time consumption comes from tedious little parts. Hopefully tomorrow we can finish up the cooling lines, charge piping, and intercooler within an hour or so since I will be working on it after I get off work. Otherwise we will be spreading it out another day or two before we get results
Thread Starter
Senior Member
Joined: 04-18-2011
Posts: 384
From: Ocala, FL
Just waiting on the tune from Trifecta! Everything is in, no leaks no issues. Had it running for about 20 minutes earlier. This kit is amazing. There is no butchering involved to gain power, just minor modification to STOCK parts. I can't wait to get the tune in to get it on the dyno and on the road!! Both Bill and I both very excited to see the results! This will be the first automatic!
