2.2L Performance Tech 16 valve 143 hp EcoTec with 150 lb-ft of torque

air intake

Old Jun 26, 2009 | 05:13 PM
  #1  
capp002's Avatar
Thread Starter
Senior Member
 
Joined: 12-12-2008
Posts: 710
From: In A House
air intake

hey everyone, i got a 2009 hhr panel, ijust got done installing the magna flow cat back exhaust . i would like to know what air intake i should go with . i have the 2.2 engine thanks guys
Old Jun 26, 2009 | 06:10 PM
  #2  
tireman1554's Avatar
Senior Member
 
Joined: 12-30-2006
Posts: 1,141
From: Lake Conroe, Texas
I personally use the Airaide intake and love it. You'll hear numerous opinions on what to use and what not to use and why one is better that the other. I prefer the Airaide because of the open filter box that pulls cool air in from the front of the car and not the fender or engine compartment. Next
Old Jun 27, 2009 | 07:27 PM
  #3  
Randomtask's Avatar
Member
 
Joined: 10-22-2008
Posts: 62
From: Vancouver
Originally Posted by capp002
hey everyone, i got a 2009 hhr panel, ijust got done installing the magna flow cat back exhaust . i would like to know what air intake i should go with . i have the 2.2 engine thanks guys

In leymans terms...they are all equal.
Buy the best deal......or if you care about other factors like" clean up the engine bay " then turn to CGS. I did. Its just fine......
Old Jun 27, 2009 | 07:53 PM
  #4  
RATATUDE's Avatar
Member
 
Joined: 09-02-2008
Posts: 61
From: St.Charles, Missouri
I use a cgs ...
Old Jun 28, 2009 | 12:25 AM
  #5  
txbass06's Avatar
Senior Member
 
Joined: 04-26-2009
Posts: 1,222
From: NE Texas
I've got the cgs as well. There's another member here that's got pretty much the same set up as you and he's runnin the AirRaid intake. From what he says, they're a good match
Old Jun 28, 2009 | 12:48 AM
  #6  
xzombiex66's Avatar
Senior Member
 
Joined: 02-10-2007
Posts: 2,727
From: LBC Ohio
GMPP CAI here and i love it.
Old Jun 28, 2009 | 05:49 AM
  #7  
capp002's Avatar
Thread Starter
Senior Member
 
Joined: 12-12-2008
Posts: 710
From: In A House
hey everyone , thanks for the replies cgs it is i just ordered it should be here this week thanks again.
Old Jul 26, 2009 | 11:24 PM
  #8  
CHHRIS04's Avatar
New Member
 
Joined: 11-30-2008
Posts: 22
From: Branson
Looking for a good deal

I'm looking for a good deal on a Cold Air Intake .. no way in heck I want to pay 300 bucks for a few pieces of tubing and a filter. Where should I look for something affordable and easy to install.
Old Jul 26, 2009 | 11:33 PM
  #9  
catdaddy137's Avatar
Senior Member
 
Joined: 12-20-2008
Posts: 835
From: durham north carolina
me too

Originally Posted by CHHRIS04
I'm looking for a good deal on a Cold Air Intake .. no way in heck I want to pay 300 bucks for a few pieces of tubing and a filter. Where should I look for something affordable and easy to install.
you can try your local napa...they should have some spectre brand pieces to make your own...i am not sure about the maf adapters they have because they are made for imports....it may be possible to make it work...or you could cut the maf tube off that you already have and add on from there.
Old Jul 27, 2009 | 05:46 PM
  #10  
CHHRIS04's Avatar
New Member
 
Joined: 11-30-2008
Posts: 22
From: Branson
cool

I might just do that.. if i have to use stock parts to bypass sensors i probably will.. i have hardly been under the hood of my car to see what im going to do yet.. thanks for the idea though.. i think there is one near by
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drummerboy0088
2.2L Performance Tech
19
Feb 10, 2015 12:25 PM
Michael20832
2.0L Performance Tech
9
Jul 8, 2009 05:16 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:20 PM.