Great info, thanks!

 

Ordered the T-909 from www.hileri.com lasr Thursday, got it Monday evening, had it installed yesterday. Total, less than $70. Sounds great. Looks even better.

 

I put on Turbo exhaust recently and love it.....The tone that comes out of the tip is amazing i paid $250 installed with stainless tubing....i suggest this exhaust to anyone looking for noise and performance......

 

If I was to get the 909 what all would do I need to do, make a hanger for it and weld it up and reset my computer or is it a simple slip on and clamp?



Fred.

 

in a 2.4, which is better for a little sound but more for performance, with a cold ait kit to come soon, should i use the 924 or the 909 from imco? Also are the claims of lost power with a CGS and the 924 real. If so how? and what would solve this issue?
Thanks all.
Fiji

 

It isn't quite that simple unless, of course, you're set up to do your own welding. I just had a local muffler shop put the T909 on our LS. It only cost me about $30.00 about a year ago. As to the computer, I didn't do anything with it. Also put a T909 on my '96 Altima around that same time. They sound good on both vehicles.

 

T-924 has a 2.5" inlet same as the 2.4L. T-909 has 2.25" inlet same as 2.2L.

 

the t924 is 2"1/4 and the t909 is 2" look again http://www.hileri.com/products/imco/...mco_turbo.html

 

I knew there was 1/4" difference I started at the wrong size, sorry for misinfromation.
Thanks for the correction.