2.2L Performance Tech 16 valve 143 hp EcoTec with 150 lb-ft of torque

Want more hp!

Old May 4, 2010 | 03:01 AM
  #1  
x_tanker's Avatar
Thread Starter
 
Joined: 05-03-2010
Posts: 8
From: bedford, TX
Talking Want more hp!

ok so i have the 2.2 with my 1LT, i was wondering if there is anyway to get more hp without spending a ton of money, and what is the most hp i can get without doing anything too ridiculous?
Old May 4, 2010 | 01:26 PM
  #2  
Old Lar's Avatar
Senior Member
 
Joined: 09-11-2007
Posts: 1,379
From: Palm Bay, Florida
more HP=more $$ just a fact of life. A lot more HP= a lot more money.
Old May 4, 2010 | 01:42 PM
  #3  
diskullman's Avatar
Senior Member
 
Joined: 01-10-2008
Posts: 681
From: NJ
Drive downhill
Old May 4, 2010 | 01:44 PM
  #4  
SmootHHR's Avatar
Senior Member
 
Joined: 01-21-2010
Posts: 1,700
From: The Middie OHIO
No2 best HP for the $
Old May 4, 2010 | 02:16 PM
  #5  
Doctuh's Avatar
Senior Member
 
Joined: 02-06-2010
Posts: 580
From: Shreveport, LA
factory increased HP

The obvious way to get a bit more HP would be to go to the 2.4 engine or better. That's why they exist! There are a lot of aftermarket modifications, such as cold air intakes and exhausts. However, each basic engine, from what I have been told, is pretty well designed. Given the costs, and risks, of aftermarket modifications you may wish to consider trading vehicles for either a 1LT with the 2.4 option, a 2LT which all have the 2.4, or the mother of all HP, the SS. I have no idea what it would take to swap out a 2.4 engine for a 2.2. Personally, I would rather trade cars and get a stock engine than do something that costly, and end up with a non-stock setup. That's why I started with a highly-optioned 2LT before adding anything else. I believe in starting with the optimal factory setup before grafting on modifications. For what you say you want to accomplish, I don't believe that any HHR with the 2.2 engine is a good substrate.
Old May 4, 2010 | 02:29 PM
  #6  
x_tanker's Avatar
Thread Starter
 
Joined: 05-03-2010
Posts: 8
From: bedford, TX
awesome

hey guys thanks for the input! im thinking about trying a airraid intake, and magnaflow cat system. that should give my lil 2.2 a little more bite!
Old May 4, 2010 | 02:38 PM
  #7  
SmootHHR's Avatar
Senior Member
 
Joined: 01-21-2010
Posts: 1,700
From: The Middie OHIO
CAI, catback, highflow cat, ingnition, chip...there are plenty of things to do. turbo and s/c are always options too, depending on depth of pockets :)
Old May 4, 2010 | 03:24 PM
  #8  
JoeR's Avatar
Senior Member
 
Joined: 10-02-2005
Posts: 1,245
From: VA
Originally Posted by x_tanker
hey guys thanks for the input! im thinking about trying a airraid intake, and magnaflow cat system. that should give my lil 2.2 a little more bite!
NOT....
Old May 4, 2010 | 03:27 PM
  #9  
JoeR's Avatar
Senior Member
 
Joined: 10-02-2005
Posts: 1,245
From: VA
Originally Posted by SmootHHR
CAI, catback, highflow cat, ingnition, chip...there are plenty of things to do. turbo and s/c are always options too, depending on depth of pockets :)

CAI... NOPE!

Catback... NOPE!

Highflow cat.... NOPE!

Ignition.... NO WAY!!

Chip... You're kidding, right?

Turbo or S/C... now your talking serious ****!
Old May 4, 2010 | 03:41 PM
  #10  
SmootHHR's Avatar
Senior Member
 
Joined: 01-21-2010
Posts: 1,700
From: The Middie OHIO
so you are trying to tell me that none of those (besides t/c or s/c) provide ANY better performance than stock parts? Do you have proof? Sure, one by itself might not do much, but all together? Come on man...why would they sell it then if it's nope, nope, nope, no way and are you kidding?

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:06 AM.