to get a hair off topic i did find this stuffhttp://autolumination.com/lightbright.html

 

I have to disagree, from a design stand-point, there is too much going on in there. A piece of diamond plate under the stereo equipment would have tied the whole design together better and made the equipment stand out as a display, which is (i'm assuming) was the point, since there isn't a good place for display thats readily visible. Also, clean up the wiring.. drill some holes and hide it! clean, clean ,clean.

 

How about something like this and using orange heat shrink on the ends like they suggested? I'm sure someone out there makes bigger or smaller as needed.
http://www.xoxide.com/1orwisl1.html

 

thank you ..that looks like it would work..cheap as a detroit prostitute..lol

 

Some of that computer grade sleeving like that also glows under black light..... Might be an interesting effect.

 

I tried with the chekerplate..cant get things to sit "flush" and level due to the raised lines in the rack itself....shims work but dont look right too much of a gap but I do agree it would tie things together..maybe a piece of foam or sumthin..weekend is comin..

 

Pretty Cool imo..

 

Pyro-

looks pretty sweet... I'm sure you tried/looked but if you flip the shelf thingy over the center ribs and outer lip is the same height might be easier to lay a sheet of plate on there

just my worthless 2 pennies

 

Some of that sticky foam draft tape would work and keep it from rattling