Audio and Video All audio, video, alarms, and all other electronics

I got next

Old May 29, 2007 | 09:37 PM
  #11  
stuns's Avatar
Thread Starter
Senior Member
 
Joined: 02-19-2007
Posts: 110
From: st. louis
Well the Pioneer AVIC-D3 is not going into the GTM HHR. Instead it's going into the 07 Premier eddition HHR. I am hopping to get this put in this weekend. So I can update with PICS!...
... That and Rock out!
Old Jun 13, 2007 | 09:24 PM
  #12  
stuns's Avatar
Thread Starter
Senior Member
 
Joined: 02-19-2007
Posts: 110
From: st. louis
Ok here is a little update. I was unable to pick up the lan harness while I was in quincy il. So as of now the radio is still sitting in my living room. Got an email today from the web site I ordered the harnes from and it has shipped. Finaly after a bit of a back order delay. Hopefuly by next wednesday or thursday I shall have it installed.

Now just to pick up the fit kit and anttena adapter from work.
Old Jun 13, 2007 | 09:49 PM
  #13  
Z-Man's Avatar
Senior Member
 
Joined: 06-21-2006
Posts: 3,100
From: Chicago
As every one else I'll be waiting for the Pics, Will you be Installing it your self and if So will you Post Step by Step Pics.
Old Jun 13, 2007 | 10:16 PM
  #14  
GDZHHR's Avatar
Senior Member
 
Joined: 04-30-2006
Posts: 9,149
From: Maryland Heights, MO
Hope you get it done by the BBQ, I'd love to hear your set-up.
Old Jun 14, 2007 | 09:37 AM
  #15  
stuns's Avatar
Thread Starter
Senior Member
 
Joined: 02-19-2007
Posts: 110
From: st. louis
according to the UPS site it should be here by monday, the 18th. So deffinatly by the BBQ. I am hopping that I can get the pinstripping done on the wife's GTM by then as well.
Old Jun 16, 2007 | 07:09 AM
  #16  
stuns's Avatar
Thread Starter
Senior Member
 
Joined: 02-19-2007
Posts: 110
From: st. louis
Well yesterday after noon I got board. Thus deciding to do some preinstallation. I removed the panels under the steering wheel and attached the BT-200 to the white plastic plate. I also pre ran the P-Bus cable into the radio compartment. Since I will have to take it apart again to run the power cable I have not yet taken pictures.

Also took out the aux glove box to see if there was a decent place to drill a hole for the Ipod cable. Everything seems as if it will work as far as I can tell. Just need to figure out where to mount that darn micraphone.
Old Jun 16, 2007 | 08:52 AM
  #17  
GDZHHR's Avatar
Senior Member
 
Joined: 04-30-2006
Posts: 9,149
From: Maryland Heights, MO
Originally Posted by stuns
Just need to figure out where to mount that darn micraphone.
Mine was mounted on the driver's side pillar.
Old Jun 17, 2007 | 09:18 AM
  #18  
stuns's Avatar
Thread Starter
Senior Member
 
Joined: 02-19-2007
Posts: 110
From: st. louis
Thats where I was origanly thinking. Since my mic is somewhat directional it has to point at the talker. With that position I would have to drill a hole in the piller trim. I would rather put a hole in something you can't see to easily. Now I am thinking about sticking it to the piece between the steering wheel and the gauges.
Old Jun 25, 2007 | 07:03 PM
  #19  
stuns's Avatar
Thread Starter
Senior Member
 
Joined: 02-19-2007
Posts: 110
From: st. louis
Everything is now installed. Just need to post those pics.
Old Jun 25, 2007 | 07:11 PM
  #20  
GDZHHR's Avatar
Senior Member
 
Joined: 04-30-2006
Posts: 9,149
From: Maryland Heights, MO
Great, glad to hear it all done. Can I listen to it Saturday?

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:11 PM.