Audio and Video All audio, video, alarms, and all other electronics

Start of System

Thread Tools
 
Search this Thread
 
Old 01-23-2007, 10:50 AM
  #1  
Senior Member
Thread Starter
 
betterof2evils4's Avatar
 
Join Date: 07-25-2006
Location: Enid, Oklahoma
Posts: 1,198
Start of System

Well... I ordered the sub that I'm going to use in the system. It's a Power Acoustik Mofo 12" sub- 1200 W RMS.. I figured this would be enough wattage for that small space. The 270 watt premium system drops pretty good for what it is, so 1200 should do nicely.
Now, I'm looking for a mono channel amp that can run 1000-1200W rms at 2 ohms, maybe a 2-channel that can be bridged to do the same. I saw the Power Acoustik A1800DB, which is a mono, runs 1100W RMS at 2 ohms, good price as well.
Any ideas on for any other amps??

Last edited by betterof2evils4; 01-23-2007 at 09:15 PM.
betterof2evils4 is offline  
Old 01-24-2007, 10:17 AM
  #2  
Senior Member
Thread Starter
 
betterof2evils4's Avatar
 
Join Date: 07-25-2006
Location: Enid, Oklahoma
Posts: 1,198
Here's a link to the sub I will be using:
http://www.poweracoustik.com/pa2006/...O_wof_mofo.htm

and the amp I'm thinking about:
http://www.poweracoustik.com/pa2006/...O_amp_cabd.htm
betterof2evils4 is offline  
Old 02-18-2007, 09:31 PM
  #3  
Senior Member
Thread Starter
 
betterof2evils4's Avatar
 
Join Date: 07-25-2006
Location: Enid, Oklahoma
Posts: 1,198
Well... got all my crap for the system....
And I'm getting it put in tomorrow. 1400W should be good in the car. Hopefully I can get some pics, show ya'll how it went...
betterof2evils4 is offline  
Old 02-19-2007, 12:11 PM
  #4  
Senior Member
 
ng8650's Avatar
 
Join Date: 02-03-2006
Location: So Cal
Posts: 1,785
What kind of box are you using for the sub and where are you putting the amp?

Ng
ng8650 is offline  
Old 02-22-2007, 12:27 PM
  #5  
Senior Member
Thread Starter
 
betterof2evils4's Avatar
 
Join Date: 07-25-2006
Location: Enid, Oklahoma
Posts: 1,198
First, sorry it took so long to reply.
I didn't get it installed on Monday... it was President's day and the bank wasn't open, so I couldn't pay. But I had it rescheduled for tomorrow.
But with the system, I'm not doing any custom install like yours yet ...
I don't remember what kind of box it was, but it was $125 . It was the only thing they had close to what I needed. As for the amp, I guess I'll just stick it under the false floor. I just hope it gets enough air. I've seen a lot of people on here that did that, so it should be fine.
I'll let you know what kind of box it is and how it sounds tomorrow though
betterof2evils4 is offline  
Old 02-22-2007, 12:45 PM
  #6  
Senior Member
 
HHR PNOY's Avatar
 
Join Date: 05-03-2006
Location: Los Angeles, CA
Posts: 855
putting the amps in the middle compartment shouldnt be a problem. I had two amps there and it never overheated on me.
HHR PNOY is offline  
Old 02-22-2007, 03:36 PM
  #7  
Senior Member
 
ng8650's Avatar
 
Join Date: 02-03-2006
Location: So Cal
Posts: 1,785
Like PNOY said, heat shouldn't be a problem. I've got two amps sandwiched between MDF and plexiglass, no problems. Look forward to seeing your setup

Ng
ng8650 is offline  
Old 02-25-2007, 03:06 PM
  #8  
Senior Member
Thread Starter
 
betterof2evils4's Avatar
 
Join Date: 07-25-2006
Location: Enid, Oklahoma
Posts: 1,198
I had it installed, and it sounds awesome, but I cannot figure out how to post pictures. I can't copy and paste, and I don't know how to do the URL thing when it's from my computer and not the web.
HELP!!!!
betterof2evils4 is offline  
Old 02-25-2007, 06:55 PM
  #9  
Senior Member
 
O6ChevyHHR's Avatar
 
Join Date: 11-18-2005
Location: Naples, FL
Posts: 3,256
pics?
O6ChevyHHR is offline  
Old 02-25-2007, 10:17 PM
  #10  
Senior Member
Thread Starter
 
betterof2evils4's Avatar
 
Join Date: 07-25-2006
Location: Enid, Oklahoma
Posts: 1,198
Yea... "pics" is an abbreviation for "pictures"...
betterof2evils4 is offline  


Quick Reply: Start of System



All times are GMT -5. The time now is 05:40 PM.