Brakes | Suspension | Shocks | Struts Brakes,Springs, Shocks,Front End Components & Steering

Anyone used (or heard of) Progress springs?

Old Aug 26, 2010 | 07:39 PM
  #1  
Putter's Avatar
Thread Starter
Senior Member
 
Joined: 05-22-2010
Posts: 581
From: Puckett, Mississippi
Anyone used (or heard of) Progress springs?

I found a complete set of lowering springs on the internet (JDMhub.com) and was wondering if anyone has feedback on them (the springs, I mean).
They caught my eye by stating that they lower 1.6" Front and 2.5" Rear, which is more than the other brands that I have looked at.
Ideally, I want to eventyally set it up on air, but due to budget restrictions, I have to stick with a static drop for the time being.

Here is a link if anyone wants to check them out...(photo is a generic photo and not the actual springs)
CLICKY HERE

They also have alignment kits and sway bars.

Another question, anyone know how low you can go before actually NEEDING some type of alighment kit?

Thanks for the input.
Old Aug 26, 2010 | 08:34 PM
  #2  
bassbase's Avatar
Senior Member
 
Joined: 01-25-2010
Posts: 640
From: Marietta, PA
Really? Lowest you've seen? From HHR Boutique:
Goldline kit: Lowering Kit drops 1.75" Front and 2.125" Rear.

Drops more once settled in.

But if you want Progress springs, save yourself some money:
http://cgi.ebay.com/ebaymotors/Chevy...Q5fAccessories
Old Aug 26, 2010 | 08:46 PM
  #3  
jay loukakis's Avatar
Senior Member
 
Joined: 10-21-2008
Posts: 1,831
From: hemet, calif.
progress springs

Progress Eng. in Anaheim, Calif. I got them about 2 years ago they supply springs and shocks for the Indy cars.
Old Aug 27, 2010 | 07:55 AM
  #4  
Putter's Avatar
Thread Starter
Senior Member
 
Joined: 05-22-2010
Posts: 581
From: Puckett, Mississippi
Originally Posted by bassbase
Really? Lowest you've seen? From HHR Boutique:
Goldline kit: Lowering Kit drops 1.75" Front and 2.125" Rear.

Drops more once settled in.
Math skills FTW. Progress Rears = 2.5" Goldline Rears = 2.125"

(yes I did notice that Goldlines are a smidge lower in the front...1.75" vs 1.6")

I am mostly just looking for feedback on ride quality, etc...
I know that quality varies from company to company, with some that just flat-out suck.

Last edited by Putter; Aug 27, 2010 at 08:43 AM.
Old Aug 27, 2010 | 10:27 AM
  #5  
Randy_W's Avatar
Senior Member
 
Joined: 07-13-2010
Posts: 184
From: Eastern Shore of MD
Originally Posted by Putter
Math skills FTW. Progress Rears = 2.5" Goldline Rears = 2.125"

(yes I did notice that Goldlines are a smidge lower in the front...1.75" vs 1.6")

I am mostly just looking for feedback on ride quality, etc...
I know that quality varies from company to company, with some that just flat-out suck.
Are you seriously trying to tell me that 2 1/2 is more than 2 1/8?
Old Aug 27, 2010 | 10:38 AM
  #6  
Putter's Avatar
Thread Starter
Senior Member
 
Joined: 05-22-2010
Posts: 581
From: Puckett, Mississippi
I blame it on being left handed. Maybe I read my tape measure right-to-left.



Oh well....we were taught that 1/8" is smaller than 1/2" back in the day, but that was before "No child left behind".
Old Aug 27, 2010 | 07:39 PM
  #7  
bassbase's Avatar
Senior Member
 
Joined: 01-25-2010
Posts: 640
From: Marietta, PA
Randy, Are you seriously trying to tell me that 1.6 is more than 1.75? Because I was under the impression from the original post that we were talking about total drop for a kit and not just the rear.

Good god people. I beleive my point was that all info I have found and seen says the Progress lowers the front about 1.5" ( 1/8" less than the Goldline) and the Goldline lowers the rear about 2.125 (1/8" less than the Progress) so the lowering "total" is the same or atleast close enough in real life because we all know, or atleast should, that the numbers they give us are more of an educated guess than actual drop. Which really makes the 2 pretty much equal. My Goldlines lowered more than advertised once settled in.

But you all knew all that and just wanted to split hairs. I understand. It's an internet forum and everyone does that on these things.
Old Aug 27, 2010 | 07:59 PM
  #8  
TomsHHR's Avatar
Senior Member
 
Joined: 01-13-2006
Posts: 3,000
From: Superior, WI - Over the Hill Warranty Club member
buy both sets and use the goldline fronts and the progress rear........ problem solved!!
Old Aug 27, 2010 | 08:37 PM
  #9  
Putter's Avatar
Thread Starter
Senior Member
 
Joined: 05-22-2010
Posts: 581
From: Puckett, Mississippi
Bassbase, I was just funnin' ya. I have heard nothing but good things about the GLs. Just was wondering about the other ones. No feedback on the Progress ones as far as settling.

And it is nearly impossible to reflect sarcasm using a keyboard. I had a smirk on my face the whole time I was typing. Thanks for the e-bay link, too. Every dollar counts.
Old Aug 27, 2010 | 10:57 PM
  #10  
IgottaWoody's Avatar
Senior Member
 
Joined: 01-13-2008
Posts: 4,708
From: Washington State, where it rains
I just stack cheese wheels in there till I get the height I want and makes for a great snak at the park.....

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:48 AM.