General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

Lowered VS. Stock

Old Feb 27, 2006 | 11:20 AM
  #11  
adamlowery's Avatar
Senior Member
 
Joined: 09-11-2005
Posts: 829
From: McLoud, Oklahoma
The gap is REALLY noticeable when your standing there looking at them. Mine looked like a 4X4 to me next to Navyflyer11.
Old Feb 27, 2006 | 11:50 AM
  #12  
teknobunie's Avatar
Senior Member
 
Joined: 09-27-2005
Posts: 299
From: Tampa Bay, Florida
Not so sure that I would drop it being that you are so close to the ground as is, and there is not really that much of a difference, that I can see. It does look SOME what lower but much at all.....I thought low riders went out in the 90's lol!
Old Feb 27, 2006 | 01:03 PM
  #13  
SoCalHHR's Avatar
Senior Member
 
Joined: 10-14-2005
Posts: 5,359
From: SoCal
I've seen a lot of pictures of lowered HHR's (since we sell the springs...), and the black models are by far the hardest to get a good read on from pictures. In person it's a whole 'nother thing. You need some bright daylight with black vehicles to get any contrast in the wheelwells.

Also, on lowering in general; it's not for everyone. Some like it, some don't - and that's ok! Personally, I'll never go back. It's too cool now. When my car was at AEM getting the intake prototyped I drove a stock LS rental for 2-weeks - BOY, could I tell the difference! I thought I was driving a Ford F-350 with a 4-inch SkyJacker lift! Couldn't wait to get back into my sweetly dropped ride.

Another thing is the improved cornering and reduced body roll (noticeable on 270-degree freeway onramps) & wind shear (on windy freeways in general). Lowering also helps with your mpg, as less air travels beneath the car causing turbulence. Take-off "squat" and braking "nosedive" are also reduced quite a bit. Your ride will stiffen, or "tighten up" - but not overly so. Of all the lowered vehicles I've owned & driven, the HHR (lowered), is the smoothest riding of the bunch. Craig at Gold-Line did an GREAT job with the rates on these springs!

Last but not least, I was driving slowly through a parking lot the other day, and what should appear right before my eyes? A "stock" HHR in the same color as mine. I saw the stock grille, and how high the car was sitting in relation to mine and immediately thought "Grandma Car."

Funny how your perspective changes after a few mods...
Old Feb 27, 2006 | 01:40 PM
  #14  
Navyflyer11's Avatar
Thread Starter
Senior Member
 
Joined: 02-23-2006
Posts: 629
From: Oklahoma
I have to agree with SoCal. my HHR is by far the smothest riding lowered car I've owned. I used the SpringTech springs, they didn't lower the back as much as the front.


I've now owned 8 cars that I have lowered.
Just call me Old School.

Last edited by Navyflyer11; Feb 28, 2006 at 09:13 AM.
Old Feb 27, 2006 | 01:42 PM
  #15  
captain howdy's Avatar
Banned
 
Joined: 10-14-2005
Posts: 9,121
From: Rochester,N.Y.
I love the flames! I didn't notice them before.
Old Feb 27, 2006 | 01:52 PM
  #16  
Navyflyer11's Avatar
Thread Starter
Senior Member
 
Joined: 02-23-2006
Posts: 629
From: Oklahoma
Yeah, kind suttle. I need to pinstripe to meet up to the flames now.
Old Feb 27, 2006 | 05:30 PM
  #17  
SIHHR's Avatar
Senior Member
 
Joined: 09-23-2005
Posts: 4,466
From: Staten Island, NY
Wow, cool pinstripe flames
Old Feb 27, 2006 | 07:07 PM
  #18  
TomsHHR's Avatar
Senior Member
 
Joined: 01-13-2006
Posts: 3,000
From: Superior, WI - Over the Hill Warranty Club member
I like the lowered HHRS but up here in heavy snow country you would get stuck all the time. I got stuck in 9" of snow driving in the driveway. Partly because of a plowed up bank I did not see under the newly fallen snow. 13" total that day.
Old Feb 27, 2006 | 08:28 PM
  #19  
Navyflyer11's Avatar
Thread Starter
Senior Member
 
Joined: 02-23-2006
Posts: 629
From: Oklahoma
Here is my lowered HHR in the snow. What's the Problem?


Just kidding, I know there is a big difference between 4" and 13" +.
Old Mar 1, 2006 | 01:31 PM
  #20  
Navyflyer11's Avatar
Thread Starter
Senior Member
 
Joined: 02-23-2006
Posts: 629
From: Oklahoma

Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:08 AM.