Magna Flow 2.0 exhaust
12-28-2009, 11:30 AM
#3
Senior Member
Join Date: 04-26-2009
Location: NE Texas
Posts: 1,222
12-29-2009, 05:11 PM
#5
Thread Starter
Join Date: 08-20-2009
Location: Nevada
Posts: 7
I am looking for the one with the 3" piping. I ordered a system the other day and my magna flow dealer told me it was a brand new kit. I guess they just released them. I was wondering if someone else already has one and if they are a good kit.
12-31-2009, 10:11 PM
#6
Member
Join Date: 08-11-2009
Location: New Orleans,La
Posts: 56
Magnaflow Muffler system
I have the system dude; It is 3" from front to back. It is 3" at the bends also. it was not compromised at all at the bends. Very good welds, and very nice piece of work. Fits very well. The tip is exactly like the one that the vehicle comes with, Just 4" in diameter. I just had to have them put a slight dent right at the coil spring support. It was nocking against this, but was a very minor,easy fix. Not to mention it is one of the best sounding exhaust I have ever heard. "No i don't work for Magnaflow." LOL
I bought it in March. I actually was one of the first to order. I was one out of 50. Only 50 pieces were made in the beginning because of economy crap. It cost cheaper for them to make more out of one pipe than making one at a time. So, It took about four months for me to get it in,on my ride, and driving. I paid for it in March, and didn't get it on my ride it felt like forever.
I bought it in March. I actually was one of the first to order. I was one out of 50. Only 50 pieces were made in the beginning because of economy crap. It cost cheaper for them to make more out of one pipe than making one at a time. So, It took about four months for me to get it in,on my ride, and driving. I paid for it in March, and didn't get it on my ride it felt like forever.
01-03-2010, 09:56 AM
#8
Member
Join Date: 08-11-2009
Location: New Orleans,La
Posts: 56
Well, you got me on that one. I know it is stainless from front to back. I don't know much about 304etc. I just know it looks like a fine piece of equipment when you open that box. The muffler is polished, and the piping is ruffed up if you know what I mean.
01-03-2010, 05:27 PM
#9
Senior Member
Join Date: 04-26-2009
Location: City of Champions
Posts: 666
Can you get a magnet.
It will stick to the muffler as all Magnaflow mufflers are 409.
If it won't stick to the main piping, it's 304
Thanks