HHR SS Topics and information on the 2008-2010 Chevy HHR SS Turbocharged models.

P0101 And Pending P0101, P0191

Thread Tools
 
Search this Thread
 
Old Jun 11, 2023 | 07:52 AM
  #1  
jcs_ss_panel's Avatar
Thread Starter
New Member
 
Joined: 08-31-2022
Posts: 24
From: Germany
P0101 And Pending P0101, P0191

Hey guys, today I drove my ss it’s hot here and I drove quick just as an info. So I drove on the highway and after that I drove for cool down, as I did that the engine light popped on. The codes on the title and picture were shown.

what I changed: MAF, MAP, K&N air filter, Sparkplugs, Ignition coils and I cleaned the air box. That’s what I have in mind currently.

can you guys help me ? Is it the K&N?


Old Jun 11, 2023 | 02:51 PM
  #2  
greg8453's Avatar
Senior Member
 
Joined: 03-29-2022
Posts: 1,241
From: Davison MI
What you changed and what you have in mind seem to be the same thing. I'm not sure what you've done.
Old Jun 11, 2023 | 02:52 PM
  #3  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,539
From: Fredericksburg,VA
Oil on the K&N? Too much would be the P0101.
Don't know about P0191, but since it is a circuit problem start with wires.


Old Jun 12, 2023 | 05:10 AM
  #4  
jcs_ss_panel's Avatar
Thread Starter
New Member
 
Joined: 08-31-2022
Posts: 24
From: Germany
Originally Posted by greg8453
What you changed and what you have in mind seem to be the same thing. I'm not sure what you've done.
yes that’s what I have done to it
Old Jun 12, 2023 | 05:12 AM
  #5  
jcs_ss_panel's Avatar
Thread Starter
New Member
 
Joined: 08-31-2022
Posts: 24
From: Germany
Originally Posted by donbrew
Oil on the K&N? Too much would be the P0101.
Don't know about P0191, but since it is a circuit problem start with wires.

filter was new no additional oil has been added.
Old Jun 12, 2023 | 08:08 AM
  #6  
RJ_RS_SS_350's Avatar
Moderator
 
Joined: 05-01-2014
Posts: 8,512
From: California
When I got P0101, a new air filter fixed it.
Old Jun 12, 2023 | 10:14 AM
  #7  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,539
From: Fredericksburg,VA
is the K&N the oiled type? They are famous for destroying MAF sensors.
Did you recheck the MAF connector?
Did you check the fuel rail pressure sensor connector?
The MAF and FRPS are in close proximity to each other, maybe some wires got frayed.
Old Jun 12, 2023 | 12:50 PM
  #8  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 40,091
From: Welland,Ont Canada
A good cleaning and very light mist of air filter oil on the dirt side of the element should correct it
Old Jun 14, 2023 | 06:28 AM
  #9  
PulpFriction's Avatar
Senior Member
 
Joined: 12-05-2014
Posts: 3,370
From: Northern Ohio
Two sensors giving you trouble at once may be a sign of a failing battery. Hot weather kills batteries. Could be a problem with a ground.
Old Jun 15, 2023 | 08:41 AM
  #10  
jcs_ss_panel's Avatar
Thread Starter
New Member
 
Joined: 08-31-2022
Posts: 24
From: Germany
Originally Posted by PulpFriction
Two sensors giving you trouble at once may be a sign of a failing battery. Hot weather kills batteries. Could be a problem with a ground.
yeah it’s been sitting for some weeks and wasn’t on the battery charger.



All times are GMT -5. The time now is 05:10 AM.