Got the bra from HHR Boutique and am having a problem with installing it.....the top part (hood ) is no problem, the bottom part is causing me all sort of problems, the top fasteners that go over the side of the wheelwell are to large and keep coming undone. I tried it out today and they will not stay attached. ('09 HHR SS) Can anyone help???

 

I don't have a SS but do have a Colgan Bra. I can attest to how difficult it was putting on the darn thing the first time.

1) Laying it out in the sun to warm it up will allow you to stretch the bra enough to get the fasteners where they need to be.

2)The fasteners need to hook onto the lip of the wheel well. A plastic trim removal tool can help things without hurting the paint - to lift the wheel well liner away from the wheel well lip so you can hook the fasteners.

 

I put the bottom part on for the first time by myself amonth or so ago and found out you have to start from the bottom upstart at the bottom of the wheel well.

 

I can't get the bottom part of the bra to fit. Same problem with the plastic 'hooks'. I haven't tried it again since that first try about 7 months ago. I may look into a clear bra. Last time I took the hood part off I had a big ding just above the grille that chipped the paint also. I don't even remember anything hitting me on the road.

 

I prefer the bro or is it the manzeer.