What else are you working on? Pics only!
#2
I've been sanding and repainting the rocker panels on my Lumina today. Nothing major. Just using a can of primer and a can of touch up paint from Meijer. Better than it was...at least it's just surface rust still!
Oops, sorry see it says pics only. Will snap one in a little bit...
Oops, sorry see it says pics only. Will snap one in a little bit...
#3
VHT niteshades redo
After winter , The headlights were looking shaby, So I removed the old niteshades (carefully scraped away) And today i'm redoing them with slightly bigger bolts, And not going quite as dark. 3 coats. Still have to clear them. Later today.
#5
Heres what I was working on before I ran out of time and money. Its an '86 Ford Bronco II, the plan was to do an engine swap to a v8 and I just needed to add the bed rails and patch a few things up but oh well the truck is no more now.
My dad then kinda took over and started this with the frame and engine of my truck and the cab of a ranger he had. We call it the Ranco since its half Bronco II and half Ranger. Will have to get updated pictures cause the Ranco is up and running with the bed on it also just have a few little things to work out.
My dad then kinda took over and started this with the frame and engine of my truck and the cab of a ranger he had. We call it the Ranco since its half Bronco II and half Ranger. Will have to get updated pictures cause the Ranco is up and running with the bed on it also just have a few little things to work out.
#10
Still have wires to route properly and chasing a fuel pump issue but it"s only a matter of time!
This motor will push 450HP but I have another sitting here that dynoed well over 600FWHP.
Too many toys and not enough time or money!