When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I looked inside the filter housing...and there is hard plastic inside that appears to be what's causing the mangled mess. Unless whoever put the last one in didn't go upwards with the filter.
When installing a new filter you can feel that plastic intrusion.
That tells you it is not being installed correctly.
As you said Ronnie the filter has to be installed with care and precision.
Check it again in 2 or 3 years, lol.
that mangled filter could be the reason your AC drain is clogged up
Most likely.
You can remove the plastic cowl cover to both check the install of the filter and clean out the leaves.
And you can bet there is a bunch in there.
The cowl cover does not seal very tight.
Most likely.
You can remove the plastic cowl cover to both check the install of the filter and clean out the leaves.
And you can bet there is a bunch in there.
The cowl cover does not seal very tight.
I did that last weekend when I put in the new butyl patch.
