Visor
 

https://www.chevyhhr.net/gallery/fil...7/hhrziker.jpgMorning folks, well i have been surfing again and was wondering, anybody know where , what , how or even if this outside (FULTON STYLE) visor can be purchased , made and from where?
Thanks for the help! have a good day

That was a custom built visor, way back when, I don’t remember seeing this style ever sold in the aftermarket. Vizor was a metal shade , converted from PT Cruiser parts

great job!
https://cimg1.ibsrv.net/gimg/www.che...959707efe8.jpg
this is the original FULTON visor on my '48 so they did a good job making it fit

You see that the replica visor on the HHR doesn’t have the hinged ends, but does look great , I’m thinking a fibreglass visor, a day or two measuring and another couple of days cutting and shaping , then the aluminium strips for the mounts! Done!
I wonder if one of those hoop rear spoilers would be wide enough?


https://cimg2.ibsrv.net/gimg/www.che...7a55ef914.jpeg
Just an idea, but could this possibly be reworked to fit the front windshield, measure 60 times cut once? Maybe need two to make one!? I don’t have my sheet metal equipment any more, but an English wheel and a planishing hammer along with hours of metal shaping , a nice visor could be a possibility.


https://cimg6.ibsrv.net/gimg/www.che...9eb8d8ad1.jpeg
https://cimg7.ibsrv.net/gimg/www.che...5c00727a1.jpeg
https://cimg9.ibsrv.net/gimg/www.che...21966d9d6.jpeg

The 48 Chevy the HHR is based on isn't much wider than the HHR, a visor that fits the 48 could be modified to fit. (I saw a 48 Suburban with an HHR dash in a show, it fit perfectly)

This might fit the bill! A little ex, but if you find one here in North America…..

https://www.ebay.ca/itm/Vintage-Auto...-127632-2357-0

https://www.ebay.ca/itm/Vintage-Peck...-127632-2357-0

Thought about the visor from my '48 cause it is made to fit lots of cars and trucks. Only need gutters and center strip to mount it to a vehicle. HHR's dont have gutters :(

I saw end pieces and centre strips available on EBay