Mods - Interior Discussion related to the looks of the interior of the HHR.

door speakers

Old May 6, 2014 | 10:18 PM
  #1  
scottyj1's Avatar
Thread Starter
New Member
 
Joined: 03-29-2014
Posts: 26
From: allentown pa
door speakers

I have an 07 hhr lt,I realized after I bought it,it does not have any rear speakers.It has the speaker grilles in the back doors but no speakers,I tried to fade the sound to the rear speakers is how I found out.My question is,are the speaker wires already ran to all the doors,all I have to do is put some speakers in or are the wires omitted
Old May 6, 2014 | 10:54 PM
  #2  
hurst2001's Avatar
Senior Member
 
Joined: 09-03-2006
Posts: 498
From: chicago
They all have speakers the problem is the connections get corroded ...you can pull your door panel off and check....
Old Apr 9, 2015 | 10:36 AM
  #3  
scottyj1's Avatar
Thread Starter
New Member
 
Joined: 03-29-2014
Posts: 26
From: allentown pa
well,I pulled out the speakers,found three out of four were blown,I replaced them with some sony x-plodes,the design chevy went to with these speakers in stupid,but,I ripped the old speakers out of the plastic,cut the rear webbing off,cut the ridge around the plastic and sanded with belt sander,installed sound mat(molded)into the frame and installed the speakers,sounds great.
Old Apr 9, 2015 | 03:16 PM
  #4  
Lethal Tendencies's Avatar
Senior Member
 
Joined: 12-26-2009
Posts: 819
From: Hebron, Ill.
Originally Posted by scottyj1
well,I pulled out the speakers,found three out of four were blown,I replaced them with some sony x-plodes,the design chevy went to with these speakers in stupid,but,I ripped the old speakers out of the plastic,cut the rear webbing off,cut the ridge around the plastic and sanded with belt sander,installed sound mat(molded)into the frame and installed the speakers,sounds great.
Got a pic of the install ? Thanks
Old Apr 14, 2015 | 05:55 PM
  #5  
scottyj1's Avatar
Thread Starter
New Member
 
Joined: 03-29-2014
Posts: 26
From: allentown pa
Originally Posted by Lethal Tendencies
Got a pic of the install ? Thanks
I have one more speaker to do,I will do a photo thing when I do it.It is not hard,just time consuming.



this was done on a cobalt.same procedure.I used wire cutters to cut the lip off and a sander to make it smooth,the video guy uses other tools.

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Silver bullet
Audio and Video
7
Jun 12, 2014 04:36 PM
shepNfl
Audio and Video
5
Jul 7, 2008 08:37 PM
sleestack
Audio and Video
3
Oct 27, 2007 04:23 PM
db0001
Audio and Video
1
Oct 19, 2007 10:50 AM
Juan
Audio and Video
19
Oct 11, 2007 10:04 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:10 AM.