Chevy HHR Network

Chevy HHR Network (https://www.chevyhhr.net/forums/)
-   Problems/Service/Repairs (https://www.chevyhhr.net/forums/problems-service-repairs-42/)
-   -   Bow tie removal (https://www.chevyhhr.net/forums/problems-service-repairs-42/bow-tie-removal-61996/)

Rippasnortus 07-15-2019 04:37 PM

Bow tie removal
 
I want to remove my bow ties front and rear to paint them body color. I could find no instructions online to do this. I know I could do this without removing them, but want to do this in a controlled environment (I do not have a garage) and I may want to add some extra effects (maybe a thin reflective pinstripe bow tie around the perimeter). Has anyone else removed these?

donbrew 07-15-2019 05:11 PM

They are held on with double sided tape. Warm it up with a hair dryer then use dental floss or fishing line to cut it.

Rippasnortus 07-15-2019 06:21 PM

Thank-you kind Sir!. I was hoping they were bolted on or attached with some kind of fastener to make for easy positioning when putting them back in place. Maybe I will rethink removing them as I would not want to get them back on only to find they were crooked. Is there a "special" tape, or can I just use any good quality two sided tape if I do decide to remove them?

Oldblue 07-15-2019 07:11 PM

3M double side molding tape works

https://cimg0.ibsrv.net/gimg/www.che...acad2f8a6.jpeg

donbrew 07-15-2019 07:12 PM

Oddly enough, 3M makes a tape for just that purpose.

Rippasnortus 07-16-2019 04:11 AM

Thanks Don. I'll take a look for it when I pick up new rotors and pads later this week.

Rippasnortus 07-16-2019 04:14 AM

Thanks for the pic, Man. Now I know what I'm looking for. Much appreciated, my Friend.

donbrew 07-16-2019 08:02 AM

They make an exterior emblem/badge tape too. You want the type with no foam, if you can find it.

Or this stuff from AutoZone:
https://contentinfo.autozone.com/zne...03601/image/4/

sleeper 07-16-2019 09:13 PM

Thanks Oldblue as well.. :twothumbs:

livingfortomorrows 07-16-2019 11:59 PM

Can confirm. I painted the "base" of the emblems black and the middles to match the car and it looks good. I used those same 3M products. Also get some masking tape to hold the emblems on while the adhesive dries.

Oldblue 07-17-2019 07:28 AM

I just posted a picture of the tape Don mentioned.

sleeper 07-17-2019 08:51 PM


Originally Posted by livingfortomorrows (Post 869594)
Can confirm. I painted the "base" of the emblems black and the middles to match the car and it looks good. I used those same 3M products. Also get some masking tape to hold the emblems on while the adhesive dries.

livingfortomorrows- Sounds like a good result then. You can post some pics, we love pics..


Originally Posted by Oldblue (Post 869603)
I just posted a picture of the tape Don mentioned.

Blue- Yea ok, but a pic is worth a thousand words.. :twothumbs:

RJ_RS_SS_350 07-17-2019 08:54 PM


Originally Posted by sleeper (Post 869664)
livingfortomorrows- Sounds like a good result then. You can post some pics, we love pics..



Blue- Yea ok, but a pic is worth a thousand words.. :twothumbs:

In other words, oldblue, your pic didn't show up. Or are you referring to the pic before donbrew's post?

sleeper 07-17-2019 08:59 PM


Originally Posted by RJ_RS_SS_350 (Post 869665)
In other words, oldblue, your pic didn't show up. Or are you referring to the pic before donbrew's post?

RJ- No I was referring to the 3M tape pic Blue posted. It showed up, I didn't see any acknowledgement of it, that's all. ..

livingfortomorrows 07-18-2019 10:09 PM

https://cimg7.ibsrv.net/gimg/www.che...c6255ccc86.jpg
Nighttime, filthy, and misaligned in this pic, but yeah... I ain't going outside right now. lol

sleeper 07-19-2019 09:31 PM

Nice match up on color in this view anyhow..


All times are GMT -5. The time now is 02:25 AM.


© 2024 MH Sub I, LLC dba Internet Brands