Took all the rotors and calipers off to paint. There are 4 9/16 bolts that are long and 4 that are short. These bolts hold the bracket onto the caliper and go into the sliders. I can't remember if the longer bolts go up front or in the rear. Anyone that has an SS could you check it out for me? Guess I should have paid attention when I took them out. Thanks guys

 

One thought would be the short ones wont grab thread?

 

Or do the long ones bottom out in any of the holes? indicating wrong position?

 

I got it figured out, as long as I have the brackets right, the long one go in the back b/c the bracket is thicker.