kustom

all over ebay just search

Greybeard999

Yeah eBay is where I got mine... Search for "Guide traffic light viewer"

Oldblue

Have a look at these

Traffic Light Viewer: Parts & Accessories | eBay

J W Davis

I noticed that one of our members had in his MODS list a "Rolled Visor"
donbb82.

Might shoot him an email about it.

donbrew

They got it from a former member by posting a "wanted".

Oldblue

That’s a female member, she bought Mortisha’s spare





She had sold it to Scott , after she sold her red HHR

LongT123

I see this is a somewhat old post but hopefully you can answer my question. I just got one of these. I had to return the first one. The second one has the same issue. The screw in the base that tightens to hold the arm that holds the prism will not tighten enough to hold the arm in place. If yours worked OK I guess it is a manufacturing flaw. Not enough room to put a washer in there. I was thinking of taking the screw and arm out and trying to bend the base closed more in a vice.

Thanks,
Bill

Oldblue

You could use a drop of loctite on TTR threads and don’t use the washer

LongT123

6

It isn't the nut on the bottom it's the little phillips screw above it. It won't tighten enough to clamp the arm in place.

firemangeorge

Just put in a longer screw.