Chevy HHR Network
0 2020/10/03 11:02:46
Removed the bumper cover
Removed the bumper cover
0 2021/08/14 21:10:42
Back side of fog lamp
Back side of fog lamp
0 2021/08/14 21:10:52
Relay zip tied to a bumper cover mount
Relay zip tied to a bumper cover mount
0 2021/08/14 21:11:03
One of 2 ballasts
One of 2 ballasts
0 2021/08/14 21:11:13
Back side of other fog lamp and the other ballast
Back side of other fog lamp and the other ballast
0 2021/08/14 21:11:23
Removing the bumper cover is pretty easy
Removing the bumper cover is pretty easy
0 2021/08/14 21:25:59
One of the ballasts
One of the ballasts
0 2021/08/14 21:26:10
Back side of one fog lamp
Back side of one fog lamp
0 2021/08/14 21:26:18
Relay zip tied to a bumper cover mount
Relay zip tied to a bumper cover mount
0 2021/08/14 21:26:27
0 2021/08/14 21:26:36
In September, started smelling a strong gasoline odor inside the car when the tank was full. Ordered the vapor line assembly from Rock Auto and installed it today. This is what the top of the tank looked like before I cleaned it and installed the new vapor lines.
In September, started smelling a strong gasoline odor inside the car when the tank was full. Ordered the vapor line assembly from Rock Auto and installed it today. This is what the top of the tank looked like before I cleaned it and installed the new vapor lines.
0 2021/12/12 20:26:02
Found this at a swap meet Saturday. There are week magnetic strips on the back of this dealer poster. It’s about the size if a rear door window. Haven’t decided what to do with it yet, but I’m leaning towards framing it. There is wall space in the garage for it.
Found this at a swap meet Saturday. There are week magnetic strips on the back of this dealer poster. It’s about the size if a rear door window. Haven’t decided what to do with it yet, but I’m leaning towards framing it. There is wall space in the garage for it.
0 2022/02/13 11:05:31
Fill tube assembly
Fill tube assembly
0 2022/05/03 08:11:50
There has to be a pin hole in the rusty area.
There has to be a pin hole in the rusty area.
0 2022/05/03 08:11:52
0 2022/05/03 08:21:22
There must be a small pinhole in the rusty area.
There must be a small pinhole in the rusty area.
0 2022/05/03 08:21:24
One bushing has broke loose, the other is badly worn.
One bushing has broke loose, the other is badly worn.
0 2023/01/01 18:01:29
One bushing is actually broken. Both are severely worn after one year of service.
One bushing is actually broken. Both are severely worn after one year of service.
0 2023/01/01 18:08:13
Moog replacement control arm with worn bushing after 2 years of service in my son’s 2008. I replaced these arms years ago and saved these as extras.
Moog replacement control arm with worn bushing after 2 years of service in my son’s 2008. I replaced these arms years ago and saved these as extras.
0 2025/11/16 20:28:47
The right arm was worse than the left arm.
The right arm was worse than the left arm.
0 2025/11/16 20:28:51
Replaced the rear bushings with the Moog problem solvers. The dog bone bushings and the ball joints were still very good.
Replaced the rear bushings with the Moog problem solvers. The dog bone bushings and the ball joints were still very good.
0 2025/11/16 20:28:54
These are the control arms I removed from my 2011 today. Right bushing was worse than the left bushing. Right ball joint was worn out. These were in my 2011 for 2.5 years.
These are the control arms I removed from my 2011 today. Right bushing was worse than the left bushing. Right ball joint was worn out. These were in my 2011 for 2.5 years.
0 2025/11/16 20:28:58
Close up of the bushings.
Close up of the bushings.
0 2025/11/16 20:29:01
Close up of the right ball joint
Close up of the right ball joint
0 2025/11/16 20:29:04
Worn out rear bushing from Moog arm that was removed from the 2008 years ago. I kept these as extras.
Worn out rear bushing from Moog arm that was removed from the 2008 years ago. I kept these as extras.
0 2025/11/16 20:57:45
Left replacement lower control arm removed from the 2008 years ago.
Left replacement lower control arm removed from the 2008 years ago.
0 2025/11/16 20:57:48
0 2025/11/16 20:57:51
Mevotech arms removed from my 2011 today
Mevotech arms removed from my 2011 today
0 2025/11/16 20:57:56
Rear bushings were toast
Rear bushings were toast
0 2025/11/16 20:57:59
0 2025/11/16 20:58:02