Chevy HHR Network
0 2020/07/14 18:26:24
Rusty but , just barely serviceable
Rusty but , just barely serviceable
0 2020/07/14 18:32:40
Some lining left , but not much
Some lining left , but not much
0 2020/07/14 18:32:56
Same here
Same here
0 2020/07/14 18:33:09
The anchor springs are a bear to remove, it looks like the backing plate and brakes are assembled then installed on the axle and then the hub is installed, lucky factory workers.
The anchor springs are a bear to remove, it looks like the backing plate and brakes are assembled then installed on the axle and then the hub is installed, lucky factory workers.
0 2020/07/14 18:33:18
Cage nut bottom side, welded to the body
Cage nut bottom side, welded to the body
0 2020/07/14 18:41:41
The top view, I think there are grooves the cage fits into
The top view, I think there are grooves the cage fits into
0 2020/07/14 18:41:43
#10
#10
0 2020/07/15 08:38:51
0 2020/07/15 10:21:57
0 2020/07/15 10:29:34
0 2020/07/15 12:07:04
0 2020/07/15 13:22:09
0 2020/07/15 17:33:53
0 2020/07/16 04:26:43
0 2020/07/16 06:14:04
0 2020/07/16 07:13:20
0 2020/07/16 07:14:45
0 2020/07/16 07:30:21
0 2020/07/16 08:07:41
0 2020/07/16 08:08:56
That’s it with the wires connected to it on through the , that’s the starter just below it, and the knock sensor to the right.
That’s it with the wires connected to it on through the , that’s the starter just below it, and the knock sensor to the right.
0 2020/07/16 11:41:25
0 2020/07/16 11:49:38
0 2020/07/16 13:37:14
0 2020/07/16 19:42:38
Passenger side of Steve’s ‘06
Passenger side of Steve’s ‘06
0 2020/07/17 05:31:39
Driver’s side of his HHR , I hope I can get in there without dropping the cradle
Driver’s side of his HHR , I hope I can get in there without dropping the cradle
0 2020/07/17 05:31:40
0 2020/07/17 06:00:07
0 2020/07/17 08:01:36
0 2020/07/17 08:09:52
0 2020/07/17 08:10:51
0 2020/07/17 08:27:35
Be vary vary quite, I’m hunting HHR Panels!!!
Be vary vary quite, I’m hunting HHR Panels!!!
0 2020/07/17 15:04:03
0 2020/07/18 06:13:40
These two retaining arms , this is the side that goes down against the body
These two retaining arms , this is the side that goes down against the body
0 2020/07/18 06:19:49
This would be the top side , , now I wonder are there Slots or holes in the body for those little triangle like points to locate the cage prior to welding?
This would be the top side , , now I wonder are there Slots or holes in the body for those little triangle like points to locate the cage prior to welding?
0 2020/07/18 06:19:51
That’s the hose on the passenger side of the catalytic converter
That’s the hose on the passenger side of the catalytic converter
0 2020/07/18 19:15:15
This was the original from Oldblue, the shaft was dry and the yoke was sticking.
This was the original from Oldblue, the shaft was dry and the yoke was sticking.
0 2020/07/19 05:32:56
0 2020/07/19 05:45:35
0 2020/07/19 06:44:01
0 2020/07/19 08:36:32