Chevy HHR Network
This one is mine!! Fun test.
This one is mine!! Fun test.
0 2020/04/29 06:25:52
Not mine, either!
Not mine, either!
0 2020/04/29 06:24:58
No longer mine!
No longer mine!
0 2020/04/29 06:23:54
0 2020/04/28 18:29:02
0 2020/04/28 16:44:27
0 2020/04/28 16:43:20
0 2020/04/28 11:15:55
0 2020/04/28 07:00:16
0 2020/04/28 06:11:24
0 2020/04/28 06:09:52
This fuse also is significant, you check here to , right
This fuse also is significant, you check here to , right
0 2020/04/25 17:21:18
Something like 11 5/16 inches static height
Something like 11 5/16 inches static height
0 2020/04/25 11:03:11
11 5/16 to 11 3/8 inches
11 5/16 to 11 3/8 inches
0 2020/04/25 11:03:04
The drivers side
The drivers side
0 2020/04/25 10:00:05
The HHR is sitting much better in the rear , more level and no harsh ride or bottoming out! The bump stops for the FE5 springs have a different part number and are a bit shorter then the FE3 ones.
The HHR is sitting much better in the rear , more level and no harsh ride or bottoming out! The bump stops for the FE5 springs have a different part number and are a bit shorter then the FE3 ones.
0 2020/04/25 09:59:58
27 1/2 inches, I know the glare of my head it’s hard to read the tape measure , this is the passenger side
27 1/2 inches, I know the glare of my head it’s hard to read the tape measure , this is the passenger side
0 2020/04/25 09:59:50
After FE5 springs installed 27 5/8 and a 10 mile drive in the country to seat the springs , this is the drivers side
After FE5 springs installed 27 5/8 and a 10 mile drive in the country to seat the springs , this is the drivers side
0 2020/04/25 09:59:43
This was the measurements the same for both sides after letting the car down on the ground
This was the measurements the same for both sides after letting the car down on the ground
0 2020/04/25 09:59:36
Or maybe 12 7/8 inches static length
Or maybe 12 7/8 inches static length
0 2020/04/25 09:59:28
FE5 spring is 12 3/4 inches
FE5 spring is 12 3/4 inches
0 2020/04/25 09:59:21
And the same in the left rear.
And the same in the left rear.
0 2020/04/25 06:31:55
The rear fender height is just a smidge under 28 1/2 inches on the right rear
The rear fender height is just a smidge under 28 1/2 inches on the right rear
0 2020/04/25 06:31:47
I measured with two hands and locked the tape measure 11 5/16 inches
I measured with two hands and locked the tape measure 11 5/16 inches
0 2020/04/25 06:31:40
Static height is about 11 3/8 or 1/2 inches
Static height is about 11 3/8 or 1/2 inches
0 2020/04/25 06:31:34
Hellshotrod sent me these FE5 rear springs , to lower the rear of the BlackSwan
Hellshotrod sent me these FE5 rear springs , to lower the rear of the BlackSwan
0 2020/04/25 06:31:25
It’s an M6 nut that holds those brackets in place
It’s an M6 nut that holds those brackets in place
0 2020/04/24 19:23:17
0 2020/04/24 17:58:13
0 2020/04/24 15:31:34
It should be in the middle like this!
It should be in the middle like this!
0 2020/04/24 13:06:20
0 2020/04/24 09:30:45
One more time for Donbrew
One more time for Donbrew
0 2020/04/24 09:00:40
0 2020/04/24 07:44:29
0 2020/04/24 06:18:51
0 2020/04/24 06:12:17
0 2020/04/23 16:38:36
0 2020/04/23 14:28:09
0 2020/04/23 14:01:08
0 2020/04/23 13:24:32
0 2020/04/23 13:21:45
0 2020/04/23 13:12:09