Chevy HHR Network
0 2026/02/13 06:52:38
0 2026/01/18 12:41:39
0 2026/01/18 11:37:04
Here it is
Here it is
0 2026/01/18 07:46:31
281,930 miles
281,930 miles
0 2025/11/20 10:52:44
Had I know better at the time I would have bought the full circle type
Had I know better at the time I would have bought the full circle type
0 2025/02/10 14:21:05
This one was all metal, heavy
This one was all metal, heavy
0 2025/01/10 12:38:56
0 2024/09/12 13:09:53
0 2024/09/12 12:19:58
0 2024/09/12 12:19:37
0 2024/09/12 06:38:44
Thanks. I had forgot they were that housing…..this is the bolt. .
Thanks. I had forgot they were that housing…..this is the bolt. .
0 2024/09/10 06:45:09
0 2024/09/09 09:57:11
Suspicious looking line I can see in inspection mirror. What do yall think?
Suspicious looking line I can see in inspection mirror. What do yall think?
0 2024/09/09 08:54:31
0 2024/05/23 10:01:09
0 2024/05/23 09:59:13
0 2024/05/22 14:17:42
0 2024/05/22 13:55:45
0 2024/05/21 13:07:54
Looks pretty clean to me
Looks pretty clean to me
0 2024/05/19 11:12:21
0 2023/08/29 08:27:21
0 2023/08/29 08:04:27
0 2023/08/26 08:04:57
0 2023/08/26 08:02:08
0 2023/07/12 13:08:27
0 2022/08/10 14:27:19
Dual….59mm long.
Dual….59mm long.
0 2022/06/30 07:24:09
Another dual configuration…
Another dual configuration…
0 2022/06/30 07:24:01
Single.
Single.
0 2022/06/30 07:23:48
Thinking….for the dual maybe. Left and right for singles.
Thinking….for the dual maybe. Left and right for singles.
0 2022/06/30 07:23:35
0 2022/06/30 07:10:36
0 2021/11/09 15:16:49
0 2021/11/09 15:16:45
0 2021/10/25 17:21:38
Hot glue dent pull current in progress
Hot glue dent pull current in progress
0 2021/10/25 17:16:34
R-134a pressure chart
R-134a pressure chart
0 2021/05/21 05:02:54
The 3 original mounting screws are plenty long enough so no need for others. On mine, I should have allowed for the angle built into the plastic base/flange....that is why it is off-centered a tad....but it works
The 3 original mounting screws are plenty long enough so no need for others. On mine, I should have allowed for the angle built into the plastic base/flange....that is why it is off-centered a tad....but it works
0 2021/05/21 04:09:27
Here is the extra i almost finished to address the busted out mounting holes....where the pencil line is a .530 (in) slots centered between the holes so it can be slide into place. Seems that the screw holes are not symmetrical....just looks that way
Here is the extra i almost finished to address the busted out mounting holes....where the pencil line is a .530 (in) slots centered between the holes so it can be slide into place. Seems that the screw holes are not symmetrical....just looks that way
0 2021/05/14 18:26:06
0 2021/05/12 06:20:18
Driver airbag
Driver airbag
0 2021/05/12 06:13:41