2.2L Performance Tech 16 valve 143 hp EcoTec with 150 lb-ft of torque

2.2 1200hp

Old 06-25-2015, 08:50 AM
  #1  
Senior Member
Thread Starter
 
Cokeybill's Avatar
 
Join Date: 03-28-2008
Location: Oshawa
Posts: 1,115
2.2 1200hp

Did anyone watch Pass Time on Fox Racing. One fella had a rail with an Ecotec 2.2L twin turbo throwing out 1200 HP. His run ended up with the rear end sliding sideways on launch. Never seen or heard of a 2.2 putting out that kind of HP.
Cokeybill is offline  
Old 06-25-2015, 11:33 AM
  #2  
Administrator
 
Oldblue's Avatar
 
Join Date: 10-13-2011
Location: Welland,Ont Canada
Posts: 36,434
Nope, never saw that episode
Oldblue is offline  
Old 06-25-2015, 12:35 PM
  #3  
Senior Member
 
db/sb's Avatar
 
Join Date: 06-26-2006
Location: San Bernardino, California
Posts: 1,876
That was originally on in 2010 or sometime back then IIRC. I didn't see it this time.
db/sb is offline  
Old 06-25-2015, 01:01 PM
  #4  
New Member
 
HHR5678's Avatar
 
Join Date: 09-02-2013
Location: Arizona
Posts: 21
Wish I had that setup in my LT.
Here is the link I found of the 202MPH 1/4 run
HHR5678 is offline  
Old 06-25-2015, 10:51 PM
  #5  
Platinum Member
 
sleeper's Avatar
 
Join Date: 01-09-2007
Location: SE USA
Posts: 15,855
Haven't seen that one, but anyone remember the SoCal Speedster, reported to have a 2.2L w/ over 1,200 hp & was attempting to break a salt flat record.

Unfortunately, I believe after some runs it crashed.
Attached Images  
sleeper is offline  
Old 06-26-2015, 03:26 PM
  #6  
Senior Member
 
JerseyJames's Avatar
 
Join Date: 08-24-2012
Location: State of Confusion, U.S.A.
Posts: 177
Talking ECOTEC Horsepower

speaking of HP ... excerpt from ECOTEC performance engine building manual, admittedly for drag motors , but ...1400 HP =



check/download the manual HERE
JerseyJames is offline  
Old 06-26-2015, 03:36 PM
  #7  
Banned
 
LawDog88's Avatar
 
Join Date: 10-02-2010
Location: Port Huron, MI
Posts: 5,933
Garry Speedwagen was working on something like this for a while, IIRC.
LawDog88 is offline  


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:39 AM.