2.2L Performance Tech 16 valve 143 hp EcoTec with 150 lb-ft of torque

2.2 1200hp

Old Jun 25, 2015 | 08:50 AM
  #1  
Cokeybill's Avatar
Thread Starter
Senior Member
 
Joined: 03-28-2008
Posts: 1,115
From: Oshawa
2.2 1200hp

Did anyone watch Pass Time on Fox Racing. One fella had a rail with an Ecotec 2.2L twin turbo throwing out 1200 HP. His run ended up with the rear end sliding sideways on launch. Never seen or heard of a 2.2 putting out that kind of HP.
Old Jun 25, 2015 | 11:33 AM
  #2  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 40,097
From: Welland,Ont Canada
Nope, never saw that episode
Old Jun 25, 2015 | 12:35 PM
  #3  
db/sb's Avatar
Senior Member
 
Joined: 06-26-2006
Posts: 1,876
From: San Bernardino, California
That was originally on in 2010 or sometime back then IIRC. I didn't see it this time.
Old Jun 25, 2015 | 01:01 PM
  #4  
HHR5678's Avatar
New Member
 
Joined: 09-02-2013
Posts: 21
From: Arizona
Wish I had that setup in my LT.
Here is the link I found of the 202MPH 1/4 run
Old Jun 25, 2015 | 10:51 PM
  #5  
sleeper's Avatar
Platinum Member
 
Joined: 01-09-2007
Posts: 16,081
From: SE USA
Haven't seen that one, but anyone remember the SoCal Speedster, reported to have a 2.2L w/ over 1,200 hp & was attempting to break a salt flat record.

Unfortunately, I believe after some runs it crashed.
Attached Images  
Old Jun 26, 2015 | 03:26 PM
  #6  
JerseyJames's Avatar
Senior Member
 
Joined: 08-24-2012
Posts: 177
From: State of Confusion, U.S.A.
Talking ECOTEC Horsepower

speaking of HP ... excerpt from ECOTEC performance engine building manual, admittedly for drag motors , but ...1400 HP =



check/download the manual HERE
Old Jun 26, 2015 | 03:36 PM
  #7  
LawDog88's Avatar
Banned
 
Joined: 10-02-2010
Posts: 5,933
From: Port Huron, MI
Garry Speedwagen was working on something like this for a while, IIRC.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:02 PM.