Quarter Mile Time
10-22-2006, 06:38 PM
#1
New Member
Thread Starter
Join Date: 06-01-2006
Location: florida
Posts: 16
Quarter Mile Time
No worries, I searched for this topic before I posted but....the only talk of quarter mile time I have seen was for the 2.2L motor. Has anyone taken their 2.4 to the track? 1/4 time? 0-60 time? Thanks
11-15-2006, 06:44 PM
#4
Join Date: 09-23-2006
Location: APOPKA,Florida
Posts: 3
I have a daytona Blue Metallic 2LT. Loaded everything except the spoiler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
11-15-2006, 08:21 PM
#6
Senior Member
Join Date: 01-13-2006
Location: Tucson, AZ
Posts: 1,059
If you check around SoCalMike has a dash mount meter that registered his at a 15.86... That should give you a good starting number for a slightly modifed 2.4 (CGS intake, IMCO) with an auto trans at sea level. Good hunting!
11-15-2006, 10:05 PM
#7
New Member
Thread Starter
Join Date: 06-01-2006
Location: florida
Posts: 16
Originally Posted by FoSHHR
I have a daytona Blue Metallic 2LT. Loaded everything except the spoiler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
Do you have the 2.2 or 2.4 ?
Last edited by Ghost Ridin; 11-16-2006 at 01:45 AM.
11-15-2006, 11:25 PM
#8
Platinum Member
Join Date: 05-09-2006
Location: "Upland" Mesa, Arizona
Posts: 6,804
Originally Posted by Ghost Ridin
Do you have the 2.2 or 2.4 cyl?
